Diesel Engine ConversionsDiesel Engine Swaps , 4bt Diesel and All Diesel Engine Conversion Related Discussions
Welcome to Diesel Bombers Forums!
Welcome to DieselBombers .com.
You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Diesel Bombers Forums community today!
Ok so In gonna try to build a diesel scooter and am looking for other ideas so I can fully figure out how I'm gonna do this. So my girlfriends dad gave me a razor scooter that has a 40cc gas motor on it that doesn't run. I was going to just try to fix it but instead if got to thinking of making it into a cool project and try to put a diesel motor on it. Now I'm thinking of going with something like this http://item.mobileweb.ebay.com/viewi...d=180700361852 or a similar single cylinder diesel motor or maybe even a diesel generator motor? Would do you guys think. What do you think would be the easiest way to go about it? And yes I know it won't be easy. Just easiest
going from 40cc gas to 418cc Diesel....and weighs over 100lb..... the scooter's suspension won't have much room left for the weight of a rider.... you could address that, I suppose, with stronger springs, but, ultimately, you'd be limited by two characteristics of the wheel-spindles. Up front, the spindles and wheel bearings would wear out faster. Out back, the torque would probably shear the drive-train's weakest component. Weren't there any that were smaller?