6.9 p1689
#1
6.9 p1689
Have 2000 6.9 with about 200k. started little slow a couple times then quot starting. P1689 and P1689pd . diesel Supply not running,but wifll if i wire it straight to battery . Has power at pigtails plug tithe pump until I plug it in. Actron cp9125 scanner. Any ideas???
---AutoMerged DoublePost---
DiesEl supply pump will not run plugged in
---AutoMerged DoublePost---
There is power at the pigtails until i plug the pump to it and the wire loses power
---AutoMerged DoublePost---
5.9 Cummins
---AutoMerged DoublePost---
DiesEl supply pump will not run plugged in
---AutoMerged DoublePost---
There is power at the pigtails until i plug the pump to it and the wire loses power
---AutoMerged DoublePost---
5.9 Cummins
Last edited by joeycad1; 06-05-2012 at 04:31 PM. Reason: Automerged Doublepost
#2
P1689 - No Communication Between ECM and Injection Pump Module Data link circuit failure between ECM and fuel injection pump. Low power, engine derated, or engine stops.
check your fuel pump relay by replacing it with a new one....
check your fuel pump relay by replacing it with a new one....
Thread
Thread Starter
Forum
Replies
Last Post
greasesheik
Diesel In Distress - Support Ticket
2
04-09-2015 09:33 PM
tumble72
Ford 83-94 6.9 and 7.3L General
8
11-27-2014 10:31 PM
tumble72
Ford 83-94 6.9 and 7.3L General
1
11-10-2014 08:41 PM