Wl a Np241 from a standard bolt up to an auto?
#1
Wl a Np241 from a standard bolt up to an auto?
Didn't wanna post it in 911 but I have to know in a hurry before someone else buys it. I have a 95 auto 2500. Xfer case front case split in half last night driving home Think my driveshaft gave out and the vibration split it. Anyway, a guy on craigslist is selling an no241 off a 95 with a standard. Will this bolt right up or no?
#2
Yes and no. You will have to swap the input shaft from your old transfer case to the new one.
If they are both DLD or DHDs then that is all you have to do. Otherwise the rear output shaft will be different and you will have to have the slip yoke from the other transfer case.
Or you could just transfer all the guts from yours into his case a probably be fine.
If they are both DLD or DHDs then that is all you have to do. Otherwise the rear output shaft will be different and you will have to have the slip yoke from the other transfer case.
Or you could just transfer all the guts from yours into his case a probably be fine.
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
12-04-2014 04:00 PM
NiNjAassasin545
12 Valve 2nd Gen Dodge Cummins 94-98
0
12-02-2014 11:40 PM