help with an injection system
#1
help with an injection system
have an 06 ram 3500 (5.9 cummins). just finnished putting in new injectors and tubes, an airdog 165 and a h&s mini max chip with pyro kit and when i went to start the truck it just turns over without even trying to fire.... i bled the lines out up to the CP3 pump and after that pump, i was getting frustrated so i even cracked the injectors themselves, everything is getting fuel but the truck will not start. no smoke out of the exhaust to show any type of combustion.... i guess it has to be an electrical problem but im not really sure where to start, does anyone have any pointers, advice or tips ? id really appreciate some help....
thanks
thanks
Last edited by XTREMIST; 09-05-2012 at 11:55 PM.
#5
I didnt bother plugging the mini max in, just installed most of the components etc. i left it unplugged from the obd2 port. And i realize that its dangerous being under 24000 lbs but i couldnt figure any other way to see if there was fuel at the injectors....... Im wonderin if theres a fuse or relay blown...?
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
6.7 Liter Dodge Cummins 07.5-12
3
08-03-2015 10:45 AM
carid
Group Buy
2
02-02-2015 02:54 AM