I saw on a hotrod show about this POR stuff..............I have never used it however it looks like to be some really good stuff for like truck frames and running gear....look under yer truck and see all that surface rust this may want you to try the POR stuff

http://www.stoprust.net/POR15_Info/POR15_Paints.htm

Whit's Sig:

* 01 Cummins/Dodge/HO/6 speed*275 injectors*PDR 35 turbo w/14cm housing & high pressure boots*HTT 3 piece ported exhaust manifold*Progaurd 7 with prefilter*Edge Comp*Fass II*Southbend con OFE*Jacobs brake*5"Stacks Big ens*E/F shift knob w/2low & brake switch*10 Gages*KW Ram air System cab controlled*Rickson 19.5x265's*True speed calibrator*Rancho 9000's*DT track bar*DSS steering stabilizer*KW Side impact rails*KW Traction Bars*Toolbox/fueltank 60 gal Combo*Mag High Tech Diff Cover*Ranchand bumpers*Grover air horns*Rear Wheel Cylinder Upgrade DYNO 375 Horse 941 Torque

“Life is not about waiting on the storms to pass…it’s about learning how to dance in the rain.”

A lot of guy swear by it just don't get it on anything you don't want it on.

dozerboy's Sig:

These views expressed on this post are not my own, but rather randomly generated computer gibberish and in no way should be used to judge the author's IQ or mental health.

that stuff works pretty good. eastwood company also sells its own brand that is a little cheaper and works good too.

the best way to use this stuff is to paint it after it's on. it doesn't hold up to uv or road salt very good on its own.

Johnny Cetane's Sig:

Three Time Survivor Of Excrement Creek

Pretty cool looking stuff I will have to give it a try.

powerstroke07's Sig:

2007 Ford PSD FX4 6.0L
SCT XCAL2 Tuner, Airraid intake, 4" Turbo-back MBRP exhaust, Zoo-dad mod, High-Idle mod, Quadzilla Commander, FN74 Vegistroke system, Nerf Bars, Billet Grille.

the stuff works great, but like said before dont get it on anything that you dont want it on, it wont come off, including your skin. also dont put it on something that will be in direct sunlight, its sensative to UV rays and will fade very quickly

DBogo's Sig:

1995 Ram 2500 12v NV4500 <acronym title="Four Wheel Drive"><acronym title="Four Wheel Drive">4x4</acronym></acronym> regular cab
1990 VW Jetta 1.6 5spd 266k and still going strong
1983 Mercedes Benz 240d 4spd 110k original miles FOR SALE
Thanks to Upstate Diesel Performance

Rustbullet is supposed to be even better:

Stop Rust with Rust Inhibitor Products, Rust Paint & Coating

Dr. Evil's Sig:

DIESEL BOMBERS LEAD ADMINISTRATOR

CLICK HERE FOR SPONSORSHIP INFORMATION
CLICK HERE TO BECOME A PREMIUM MEMBER AKA BOMBARDIER
___________________________________________

98 12V quad cab 4X4 AND 2001 24V quad cab 4X4

I agree.....have used the POR-15--very important to do the entire process as not doing so will yield crappy results--the Rust Bullet, and Eastwood's Rust Encapsulator.

Rust Bullet was the best. Not cheap, but worked the best. FWIW....

Mr. Miyagi's Sig:

A computer once beat me at chess, but it was no match for me at kick boxing.

I luv the rust bullet. I've used it on several trailers. It was kinda iffy in the beginning cause paint just didn't want to stick to it for the long term. But now they have their own paint to go with it and the results are great. No more havin to fight with all the surface prep for that little bit a rust before you can paint. Price on it, well that's a nother matter. In my case I figured my time had a price on it in those days and the prep work it saved me cut several hours off my time, now days I'd have to think about it a little harder.

Uncle Bubba's Sig:

DIESEL BOMBERS ADMINISTRATOR

CLICK HERE FOR SPONSORSHIP INFORMATION
CLICK HERE TO BECOME A PREMIUM MEMBER AKA BOMBARDIER
_________________________________________

99 Quad Cab, 4wd, Drag Comp W/Pump Wire & Boost Elbow installed, K&N Air Canon, MBRP exhaust, Belt Drive Lift Pump and bottom Bulkhead feed from the tank, Isspro EV Pyrometer, Boost Gauge, Fuel Pressure Gauge, DT Pro Fab Trac Bar, South Bend 13-1.25 Con O Clutch, Ranch Hand Bumper, Borgeson Steering Shaft, Black Silicone Boots, 2" Lift Soft Ride Front Coils, Solenoid High Idle Kit, Bilstein 5100 HD Shocks, Rickson 19.5 Wheels w/Hancoock Rubber, HD Maxx Link Sway Bar Links, Superlift dual front stabilizer, EGR Brakes Front and Back, RV275 Injector's, Blue Chip VP44, Prodigy brake controller, B&W Gooseneck hitch and more I can't remember right now. Not to mention more to come I'm sure.
374.2/846.7 at 30psi

Good info

GPM's Sig:

1984 Fleetwood "Pace Arrow" Eleganza
26' Class A
6.2L Detroit Built GM Diesel
Chevrolet P37 chassis

"Running Buffalo"

Ive used por 15 with good results .but dont get it on you !!!

I used a product called zero rust. I love the stuff. It doesn't chip off or peel like POR. If you join Welcome To Autobodystore.com They sell Zero Rust for $50. Gallon. Lots of guys have switched from POR to Zero Rust & won't go back. Here is some info from Len, he used POR a long time before switching.

http://www.autobodystore.com/new_page_1.htm

cummins724's Sig:

99 Quad Cab 4x4, 5 speed, M5's, Super B Special 64/71/14, HTT CRACKED manifold,[B]3rd Gen E-Brake, ADRENALINE, Smarty, Redline, AFE, SB DD, Fluidamper, Airdog 150, ARP studs, Orings, DSS & 3rd Gen Bar 607hp/1141lbft http://www.youtube.com/watch?v=DizzchwGAec

take it from a body man por 15 dont get it on you hands and were a mask. there trying to ban it in some areas because depending were you live it has chromeite in it to disolve the rust. por 15 is just ok you can buy allot better stuff out there rm and ppg make a product simar but without the chromeite, chromite is nasty stuff just like lead paint. find out ten 20 years later it gives you cancer. One big problem with por 15 is if you have allot of rust will only make it look good for a little while. sometimes comes off in sheets saw a car out here a guy sanded it just ok had a tonnnnnn of rust this is when por 15 had start comeing out more guy painted the whole car. its comeing off like driveway sealer off his car. seen it a few times in differnt cases. you want a cheap fix go to home depot get a can of primer that you brush on that says on the can adhears to rust then get a can for what ever color you want to paint it its cheaper faster and easier.

weekend project maybe, frame looks kinda ugly

2500HeavyDuty's Sig:

Chassis Saver


The best^ but not the cheapest.

kazairl's Sig:

02 6 speed High output 4.10 gears AFE stage 2 Intake AFE 4" straightpipe Edge Jammers 100HP Injectors Quadzilla Adrenaline BD short shift 285/75 R16 Wild Country A/T on Eagle Alloys Some aftermarket speakers and a couple subs