i have a 1999 dodge cummins 24 valve. the truck is hard to start after sitting for a couple of hours. i installed a new lift pump from pennsicola deisel the upgraded version, also installed a new injection pump from pennsicola. still having the hard start issue after the truck sits for a couple of hours. I have been checking for leaks in the lines and haven't been able to locate any visible issues. the truck runs great after it is started. i have been driving the truck for two weeks now since installing the new pumps hoping if there was any air in the lines it would bleed itself out, but no luck. any help would be greatly appreciated. -

Have you called Pennsicols diesel yet? I would call and ask. As for the reason im sure some of these guys can help ya out and -

xzaq103's Sig:

Chris
1998 2500 12 Valve QC Goerend trans, long bed 4x4 Red 115k Boost, EGT and Trans gauge, #100 Plate, 4" exhaust, BHAF, 4K GSK, 60lb valve springs, 16* timing, 3rd Gen wheels with 305/70/17s yeah they rub a little.

1997 2500 12 valve ext cab long bed 3.55 4x4 5 speed, 201k, BHAF, EGT and turbo gauges, Pensacola Diesel "hot" pump, Custom #0 Plate, PD stage 2 90 hp sticks, SBC Con FE. Sold....

1998.5 3500 4x4 5 speed Sold….

IF IT DON'T SMOKE BLACK SEND IT BACK!!!

Is your fuel filter new? Does it prime up easy after you change it? -

Oilfield_Mafia's Sig:

>> Become a BOMBARDIER Today! <<

_____________________________________
07 Classic LBZ CC/SB 4x4
TransGo Jr, 4" MBRP, Autometers in Pillar
Blocked, Custom Cold Air Intake, Resonator Delete
PPE

yes i tried calling pennsicola about the problem they said to check the fuel line from the tank to the lift pump for leaks. the fuel line looks great no sign of leaks, i also changed the fuel filter and it did prime up easy with no problems. -

does it do this when the fuel tank is full? -

Whitmore's Sig:

* 01 Cummins/Dodge/HO/6 speed*275 injectors*PDR 35 turbo w/14cm housing & high pressure boots*HTT 3 piece ported exhaust manifold*Progaurd 7 with prefilter*Edge Comp*Fass II*Southbend con OFE*Jacobs brake*5"Stacks Big ens*E/F shift knob w/2low & brake switch*10 Gages*KW Ram air System cab controlled*Rickson 19.5x285's*True speed calibrator*Rancho 9000's*DT track bar*DSS steering stabilizer*KW Side impact rails*KW Traction Bars*Toolbox/fueltank 60 gal Combo*Mag High Tech Diff Cover*Ranchand bumpers*Grover air horns*Rear Wheel Cylinder Upgrade DYNO 375 HP 941 TRQ

|^^^^^^^^^^^^^|||__
|---CUMMINS----- |||| '|";\,___.
|_..._...______===|=||_|__|...,]
"(@)'(@)"""" |(@ )(@ ) ````(@)

Just thank American multi-nationals in collusion with your political party. That’s right, both Democrats and Republicans sold you out. That’s because you’ve never met a poor politician. All politicians are watching their bottom lines, not yours. They never cared about you, they just wanted your vote, now they are rich and you are not. Game over.

Click Here To Learn More About BOMBARDIER'S
_______________________
DIESEL BOMBERS
Better Off Modified Baby
-----------------------------------------
Advertising Information

Give Aways - Sweepstakes - Casino - Arcade - Donations - Bomb Bay -Bomber Gear
Send In Your Photos And Videos - media@dieselbombers.com

By the "upgraded version", do you mean the in-tank pump?
Usually the fuel lines won't show leakage, but can allow air into the system.
Are you starting it properly? Turn the key on and wait for the WTS light to go out. That should also allow time for the lift pump to pressurize the system.
Also, are the grid heaters working? Do you see a draw on the voltmeter before starting and a fluctuation after starting? -

Racer9's Sig:

'96 Ram, CTD, 4X4, flatbed, ThurenFab trackbar, Lock-rite, 1 ton wheel cylinders.
Motor; #100 plate, governor springs shimmed, loose starwheel.
Exhaust; HX35/16cm, 4" downpipe into 5" turnout stacks.
Trans; Intelligent Engineering billet input shaft, Dunrite VB and single disc TC, Burt Brown rebuild/upgrade.

-

MMStar923's Sig:

Enjoy your stay... -

Nitelord's Sig:

99' Dodge Ram 2500 SLT 4x4 diesel QC/sb - MBRP dual exhaust, Edge Drag Comp stacked w/Smarty, aFe Stage 2 intake, SO VP-44, AirDog 150,
Bilstein 5100's, Revtek Leveler, Cobalt gauges, 35" Hankook MT's on 18" KMC D-back rims, Sno-way 29T, Husky 5th wheel slider & Prodigy controller.