Budget Twin kits anyone? As Low as $1100 - Page 2

jkidd · #16 11-04-2009, 03:16 PM

Originally Posted by STOVEPIPE

I just wanted to make sure I could find this post again, what kind (brand) of turbos are they for a 2nd gen and whats the different between the 2nd gen s300/s400 and 2nd gen Stock/BHT3B to make the price the same if your using the stock turbo?

Piping kit + flanges filter downpipe etc is $1200 + 100 rebate= $1100

turbos are sold separately. The s300/400 is a more efficeint set up and will support more HP. But if you are towing and not trying to stay in a budget the stock over ht3b is a better option as you only have to buy one turbo and you can support 550HP. -

STOVEPIPE · #17 11-04-2009, 03:23 PM

Originally Posted by jkidd

Piping kit + flanges filter downpipe etc is $1200 + 100 rebate= $1100

turbos are sold separately. The s300/400 is a more efficeint set up and will support more HP. But if you are towing and not trying to stay in a budget the stock over ht3b is a better option as you only have to buy one turbo and you can support 550HP.

thank you -

dieseljunky · #18 11-04-2009, 06:30 PM

is it possible to get more than 550 hp out of the stock turbo with ht3b turbo... and could u get a kit that has a flange for a stock turbo with an after market turbine housing? -

DieselMinded · #19 11-04-2009, 06:34 PM

WOW THESE PRICES ARE AMAZING -

jkidd · #20 11-05-2009, 01:05 AM

Originally Posted by dieseljunky

is it possible to get more than 550 hp out of the stock turbo with ht3b turbo... and could u get a kit that has a flange for a stock turbo with an after market turbine housing?

you can get up to about 600HP with hx35/ht3b but 550HP is better, especailly if you have not changed to a 14cm WG exhaust housing. If you are planning on going over 550-600HP you would be better off going with a s300/400. The modified 62mm s300 I have for under $1000 in my turbo group buy has a modified wastegate that will let you run the twins w/o an external wastegate.

not sure what your question is about an after market flange, can you give more details? -

jkidd · #21 11-16-2009, 09:12 PM

Twins anyone? -

adub12valve · #22 11-19-2009, 03:31 PM

would this setup work on a 12 valve also? -

Benjamin · #23 11-19-2009, 03:44 PM

What are these?

-

jkidd · #24 11-19-2009, 04:23 PM

sure will, how much HP do you want, some people can get what they want out of a single turbo without the expense of twins.

---AutoMerged DoublePost---

the brass items in the picture are pop off valves, for keeping boost at 50psi. Think of it as a budget wastegate on the cold side. Not as good as blow off valve/external wastegate but will relieve pressure and save head gaskets/lower drive pressure. It is more for the HX35/HT3b as the hx35 has a small wastegate.

S300 turbos have a lot bigger wastgate. He351 can have the wastegate modified to 1.1" -

The Following User Says Thank You to DieselMinded For This Useful Post:
jkidd

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Copyright And Legal Notice	Our Corporate Affiliates
Powered by vBulletin® Version 3.8.4 Copyright ©2000 - 2009, Jelsoft Enterprises Ltd. SEO by vBSEO 3.3.1 Diesel Bombers ® - All Content Protected Under Intellectual Property Rights Law of Registered Trademarks Reg. No. 3,494,401 Cls. 100, 101 & 104 Under Int. Cl. 38 vB Ad Management by =RedTyger=