05 3500 no start last options
#1
05 3500 no start last options
I have a 2005 6.6 duramax 3500 that just wont start. Code is a p0193 and its injector pump, fuel rail pressure sensor, or fuel pressure regulator code. Injectors are good and no fuel leaks new fuel filter and primer housing. last on my list is the injector pump and the fuel pressure sensor. One other thing it runs like it has lost the turbo no power or ummph in it. But if i unplug the mas air flow sensor it gets its power back. I put a new mas air flow sensor in it and it bogged down so i left it unpluged any thought on any of this. Any help would be verry verry helpfull
#4
#5
#6
measures the rate of return fuel from the injectors and the pump. tells you if the check ball seats in the injectors are bad or in the pumps case if it is returning too much fuel. the bottle test just lets you know you dont have a restriction on the inlet side.
since yours is an LLY the return flow test can even be done on single injectors.
since yours is an LLY the return flow test can even be done on single injectors.
#7
#8
#9
long story but no started with hard start in the morning but after it got warm no start. put glow plugs in did not help. then the p0193 code came up. changed fuel felter and primer housing. no fix droped fuel tank had good fuel pump in tank was working ond no fuel leaks in the lines. so i bought the fuel pressure regulator after it would not start with starting flood. no fix but it would start using starting flood. runing the fuel rail pressure is 800 psi under what it should be so im thinking its gunna be a injector pump. trying to fix the truck for about one year now so its my nest egg .
#10
Thread
Thread Starter
Forum
Replies
Last Post
thurobred1320
12 Valve 2nd Gen Dodge Cummins 94-98
2
05-05-2015 09:26 PM
tim12valve
24 Valve 2nd Gen Dodge Cummins 98.5-02
6
04-27-2015 11:42 AM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
Levi Miller
5.9 Liter CR Dodge Cummins 03-07
2
12-16-2014 07:43 AM