Blocker Plate for the EGR
#13
#14
#15
You'll love the EFI live. I would look on eBay for a finger stick. I have one for an LLY but I'm not sure if they are the same. I can't see why not. If they are the same let me know, I'll send ya mine for half the cost. I may still have the directions. Only used it for 2 weeks before doing EFI live.
Sent from my iPhone using Tapatalk
---AutoMerged DoublePost---
Whatever you do, do not get the stupid lope/smoke tune. It's hard on the engine cuz it cuts the fuel on and off repeatedly. Not good for the CP3. Even thou it sounds bad *** it's not worth it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
---AutoMerged DoublePost---
Whatever you do, do not get the stupid lope/smoke tune. It's hard on the engine cuz it cuts the fuel on and off repeatedly. Not good for the CP3. Even thou it sounds bad *** it's not worth it.
Sent from my iPhone using Tapatalk
Last edited by Snowbound98; 04-02-2014 at 06:32 PM. Reason: Automerged Doublepost
#16
#19
Join Date: Dec 2010
Location: Fool's Golden State
Posts: 1,190
Likes: 0
Received 113 Likes
on
109 Posts
Yes. if a piece of smog equipment is missing you will fail, unless they are morons and cant tell it is gone
with a blocker plate, as long as there is no CEL they should see nothing out of the ordinary with the engine and will have no reason to fail you
can any of you spot the blocker plate?
with a blocker plate, as long as there is no CEL they should see nothing out of the ordinary with the engine and will have no reason to fail you
can any of you spot the blocker plate?
Last edited by 2004LB7; 04-21-2014 at 10:34 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Bighouse
Ford Powerstroke 03-07 6.0L
1
04-09-2015 06:51 PM
JustAnother_cummins_guy
12 Valve 2nd Gen Dodge Cummins 94-98
4
11-10-2014 09:44 PM