lb7 bad injector
#2
When I replaced mine last year I did a lot of research and came to the conclusion that they all should be replaced. 1st being that the LB7 is notorious for the injectors going so the others will probably go soon. And 2 being the cost of the labor once they are in there doing the work you might as well let them do them all. And a little advice make sure you replace all the crush sleeves also and don't buy cheap injectors, or you will be doing it again soon.
#3
Join Date: Dec 2010
Location: Fool's Golden State
Posts: 1,190
Likes: 0
Received 113 Likes
on
109 Posts
if you are doing it yourself then you can replace one side. it is not much more time to tare down the other side once you are that far so most will replace all 8.
if money is tight and you are sure that your problem is only one one side then go ahead and replace only that side. if you are having a shop do it then get all 8 done
if money is tight and you are sure that your problem is only one one side then go ahead and replace only that side. if you are having a shop do it then get all 8 done
Thread
Thread Starter
Forum
Replies
Last Post
Dkolanski06
5.9 Liter CR Dodge Cummins 03-07
5
04-23-2015 09:32 AM
Smokin Joe
5.9 Liter CR Dodge Cummins 03-07
6
03-29-2015 12:18 PM
2ndcummins1
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
03-09-2015 10:01 AM