Diesel Bombers SIGN UP NOW

National Association of Diesel Motorsports
Go Back   Diesel Bombers > Chevy/GMC Duramax > Chevy/GMC Duramax 01-04 LB7
Sign in using an external account
Register Forgot Password?
Search


Registered Members don't see these ads. Register now it's free!

Chevy/GMC Duramax 01-04 LB7 Discussion of Chevy and GMC Trucks with LB7 Duramax Turbo Diesel Engines

Welcome to Diesel Bombers Forums!
Welcome to DieselBombers .com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Diesel Bombers Forums community today!


I am replacing my injectors and have got everything out of the way on the drivers side so far and am ready to remove the valve cover, but I have ran into a problem, might be something simple but I was getting frustrated so I ... JOIN NOW TO REMOVE TRACER

Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
  #1  
Old 08-14-2013, 12:04 PM
Newbie

   

Default Replacing injector valve cover help?? Lb7

I am replacing my injectors and have got everything out of the way on the drivers side so far and am ready to remove the valve cover, but I have ran into a problem, might be something simple but I was getting frustrated so I thought I would see if anyone has a tip or two. So when removing the Allen bolts I have 3 left right against the firewall that are a pain to get to and I really don't want to strip them out. Any help on removing them??? So far I have been using a Allen socket on some and a couple I was able to put a Allen wrench on and turn with visegrips but I can't get to those last bolts with either of my techniques

Sciuto's Sig:2001 Duramax Ext. cab. Edge juice w attitude. Intake. Straight piped
Reply With Quote
  #2  
Old 08-14-2013, 02:59 PM
turbostang7's Avatar
Diesel Wrench

   

Default

I used an Allen socket and wobbly just made sure it was seated solid in there, best of luck to you some of them are a pita

turbostang7's Sig:2002 crew cab silverado, lb7 duramax, ported turbo horn, bills intake, ppe boost valve, straightpiped efilive dsp5 from idahorob
"I always thought those were two little sandbags to keep floodwaters from floating into my bum" Peter Griffin
Reply With Quote
 
 
 
submit to reddit
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search


 
All times are GMT -5. The time now is 02:03 AM.

Copyright And Legal Notice Links Of Interest

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Diesel Bombers ® - All Content Protected Under Intellectual Property Rights Law of Registered Trademarks
Reg. No. 3,494,401 Cls. 100, 101 & 104 Under Int. Cl. 38
USE AT YOUR OWN RISK WE HOLD NO LIABILITY FOR ANY CONTENT RIGHT, WRONG OR INDIFFERENT

Protected by Copyscape Duplicate Content Check