6.5LT No Start, No Glow Plugs
#26
make sure you have power at pin 16 here site tell you pins
OBDII - On-Board Diagnostic's System - Does My Car Have OBD-II? The Connector and Communications.
if you don't have power at pin 16 code reader not going turn on
for thing it going to hard for code reader read codes for glow plugs cause time it get power up glow plugs shut off
---AutoMerged DoublePost---
Should also say the that pin 16 don't come live in till key is on so code ready come live then buy that time glow plug light is off maybe that way you not getting any reading
OBDII - On-Board Diagnostic's System - Does My Car Have OBD-II? The Connector and Communications.
if you don't have power at pin 16 code reader not going turn on
for thing it going to hard for code reader read codes for glow plugs cause time it get power up glow plugs shut off
---AutoMerged DoublePost---
Should also say the that pin 16 don't come live in till key is on so code ready come live then buy that time glow plug light is off maybe that way you not getting any reading
Last edited by Crazy; 11-20-2010 at 11:04 PM. Reason: Automerged Doublepost
#27
ok, so i got an odd twist now. Went to test the relay today, and everythign was working. lights all came on, truck started and i can now scan the computer. It did stall a couple times on me, but it started right back up. SO i must have a bad connection somewhere or what not, i have no clue. who know when i tt will start acting up again.