Don't forget to check out the Auction section. I have a few things in there right now and I know there is always guys lookin for the replacement headlights for the 2nd gen trucks. -

Uncle Bubba's Sig:

99 Quad Cab, 4wd, Drag Comp W/Pump Wire & Boost Elbow installed, K&N Air Canon, MBRP exhaust, Belt Drive Lift Pump and bottom Bulkhead feed from the tank, Isspro EV Pyrometer, Boost Gauge, Fuel Pressure Gauge, DT Pro Fab Trac Bar, South Bend 13-1.25 Con O Clutch, Ranch Hand Bumper, Borgeson Steering Shaft, Black Silicone Boots, 2" Lift Soft Ride Front Coils, Solenoid High Idle Kit, Bilstein 5100 HD Shocks, Rickson 19.5 Wheels w/Hancoock Rubber, HD Maxx Link Sway Bar Links, Superlift dual front stabilizer, EGR Brakes Front and Back, RV275 Injector's, Blue Chip VP44, Prodigy brake controller, B&W Gooseneck hitch and more I can't remember right now. Not to mention more to come I'm sure.
374.2/846.7 at 30psi

Just added the coil spring spacers/Leveling kit to the Auction House to. -

Will the head lights need alot to get up and workin? -

2141pete's Sig:

2002 dodge 2500 4x4 24v, 175 pump, 4k GSK, 191 DV's, Mack plug, .093" lines and tubes, twins, 8x.011's, and a few other things

I honestly can't answer ya. I know that you have to splice into your light harness somehow to get power to the second set of bulbs but that's about all I can tell ya. I got them in the mail from the guy, opened the box to look at them and that's where they have sat every since. That's why I'm gettin rid of em. I'm tired of steppin over them and if I haven't installed them after the 8 or so months they have been sittin here I'm guessin they never will. -

I may get with you in a few weeks if there still around, but I hope you can get them gone by then. -

you know what brand they are? -

CumminsCrazed's Sig:

Silver 2001.5 Ram 2500 Cummins H.O. 6 spd.
Silencer ring MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, LBDP Budget 5" Turbo Back Exhaust w/ 6" Flo-Pro tip, Amsoil Nanofiber 4510 Air intake filter, 20% tint, B&M Racing T handle shift knob, Alpine CDA-9887 Head Unit, Kenwood speakers front and rear

Blowin Smoke Gang - Member #13

Thank you Diesel Dummy and MRaynor!!!

Nope, not anymore I don't. I now I have seen them listed with different brands of lifts that are out there but don't even remember which ones those were right now either. But in all honesty, that's like askin what brand that chunk a steel is. That's all the things are is a milled to shape chunk of case hardend steel with some bolts welded to the top of em. -