My Cummins Turbo Diesel
Posted 12-11-2008 at 09:56 PM by 94cummins12v
well i gues this is were im suposed to right about my dodge, by the way for those that dont know me im brandon and i do have to say when it comes to this truck ive done a mighty fine job with it considering i dint have any help with finances from the parents. i have a 94 dodge ram 2500 cummins 12v turbo diesel. it has a nv4500 manual trany and a 241 transfer case. Mods started off with a #5 fuel plate, Industrial injection custom stage 3 370hp injectors and a 4000 RPM gov spring kit. after these my clutch started going out 
and i purchased a Valai 13" 6speed ceramic conversion clutch with the HD spring hub upgrade rated at 650HP and 1200TQ. then i decided it was time for a turbo which is not a hx35/40 hybrid with a 16cm non-gated housing. i then fell in love with exhaust brakes and bought a pacbrake exhuast break
. now it was time for the front end, DT profab track bar, 4 inch skyjacker lift, new tie rod ends and ball joints. blew the head gasket now i have a o-ringed head with port and polishing, oversized vales and HD valve springs all the way around, then i figured it was time rof ARP 12mm head studs
. now she is right were i want to be.
and i purchased a Valai 13" 6speed ceramic conversion clutch with the HD spring hub upgrade rated at 650HP and 1200TQ. then i decided it was time for a turbo which is not a hx35/40 hybrid with a 16cm non-gated housing. i then fell in love with exhaust brakes and bought a pacbrake exhuast break. now it was time for the front end, DT profab track bar, 4 inch skyjacker lift, new tie rod ends and ball joints. blew the head gasket now i have a o-ringed head with port and polishing, oversized vales and HD valve springs all the way around, then i figured it was time rof ARP 12mm head studs. now she is right were i want to be.
Total Comments 5
Comments
-
it wont be long and you will be wanting to change somethingPosted 12-12-2008 at 08:55 AM by biged681985 
-
Nice story. Its good to see young people doing their own work, and financing it.. It shows me that there are some hard working young folks out there to pick up the slack when I get too old to work.
Congrats on building a very nice rig!Posted 12-12-2008 at 04:49 PM by Oilfield_Mafia
-
thanks for all the positive coments much appreciated, it sure is nice knowing that i did all the workPosted 12-13-2008 at 12:26 AM by 94cummins12v
-
man you doin pretty good for your self nice cummins even though i like powerstrokes
Posted 02-23-2009 at 11:04 PM by joejoe
-
oh ye
Posted 05-12-2009 at 10:58 AM by jallen20
