DT466
#1
DT466
I went to crank up the pump and set the timing as nevrenufhp has in his vids, thought I would install a pyro post turbo so I don't melt anything down. Did a test run before with 5 ton in the box up a big long hill, hit 950 on the pyro! I think that is the max temp? If I adjust timing to 19 degrees will that give more heat?
#3
#4
If you look close, you might be able to see a 10 and 20* marker. Otherwise, find TDC, and count the hash marks backwards. Roll the engine in reverse from the alternator(only spins it in reverse if the belt is adjusted properly). From TDC, either count the hash marks individually, or measure off desired amount(each degree = roughly 1/8"). You just dont live close enuf to me, otherwise, I'd just do it for you.
Last edited by nevrenufhp; 04-27-2011 at 08:58 PM.
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post