"IANTAKE"
Bolt on intake horn that is a lot more free-flowing than stock! New! Your choice of Gloss Black or Primer!! Comes with 2 1/8" tapped ports on the back side for boost lines. If you choose not to use them you must plug off.

I do NOT have dyno sheets to prove any gain but the picture of it next to the stock intake horn says a lot!!!

Currently this intake is for 94-02 cummins equipped dodge trucks (12 & 24 valve) due to the angle of the horn. I will have 3rd gen COMMON RAIL 03-07 5.9's available soon!

FREE SHIPPING!

Note: 1994-2002 trucks will need to buy 2 new Metric bolts and depending on the condition of your factory gasket is you might need a new one (local dealership will be able to get you one) you will also need a nut for your oil check bolt as the tab is not threaded.

Money Back guarantee: If you're unsatisfied with the product send it back for your full purchase price refund!! (must be in good condition to receive full refund... no dents, gouges, bent pieces.. if there are you will receive HALF price!!! You must also provide a tracking number or delivery confirmation number!!

Per my lawyer: I am not liable for any damage caused to your vehicle once you install this! Check with your dealership if you have any vehicle warranty questions, and you must check with them before installing.. I am not liable for any vehicle warranties being denied for installing this part!






$150 to your door! Ive got a few available and will have more!!!

Ian -

IC Smoke's Sig:

CUMMINS POWER
1990 W350 LE Project Restoration
2001 2500 DTT,3rd gen head, TWIN TURBOS Stage 2 MONSTER pump!
2006 2500 4x4 5" exhaust, H2 rims, Smarty JR, AFE stg 1, B&W GN

Very Nice Ian ! -

DieselMinded's Sig:

IANTAKE. I like it! -

wtfd6's Sig:

2000 Ram3500

Thanks Mark! -

I like too Very nice job when you gonna start mass producing those bad boy's. -

Jazz's Sig:

2001 Black Auto 4x4 dually 4in exhaust~Quad Adrenaline from DieselDawgs Performance 200 hp sticks~ SMARTY~ USB Bell Turbo~Fass fuel pump~ Full Suncoast tranny

**I Just Gotta Dance**

doing it now Ive got 5 made, and just put in for 5 more for the Common Rail crowd and Ill keep production up as long as sales are up

---AutoMerged DoublePost---

I just picked up a bunch of USPS Priority mail boxes so if you buy one it will ship the same day!!

Decals were ordered as well and should be here soon.. If you buy a IANTAKE before the decals come Ill mail you one

Ian -

I like it.... -

Dr. Evil's Sig:

98 12V quad cab 4X4 AND 2001 24V quad cab 4X4

Just stumbled across this. Sweet product Ian!! -

AndyMan's Sig:

1999 2500 QC/LB Pictures 4x4 NV-5600 4.10's, Full FASS Setup, Edge HOT Juice/Attitude, Custom Zoom VT clutch, Bilsteins, DSS, DT Trackbar, Silverline 409 Exhust, BHAF, Jacobs E-Brake, Weatherguard 117-5-01 saddle box, XRF Ball Joints

thats a sweet deal! i'll probably take one next week -

bow2no1's Sig:

looking good! -

Signal 73's Sig:

95 12 valve cummins
01 12 valve cummins
06 24 Valve cummins

http://www.newenglandturbodieselpower.com

Ian will you trade me for my stocker ??

HAHA Might have to take one off yer hands!!! -

i will order one probably next week, got to pay my insurence first -

DBogo's Sig:

1995 Ram 2500 12v NV4500 <acronym title="Four Wheel Drive"><acronym title="Four Wheel Drive">4x4</acronym></acronym> regular cab
1990 VW Jetta 1.6 5spd 266k and still going strong
1983 Mercedes Benz 240d 4spd 110k original miles FOR SALE
Thanks to Upstate Diesel Performance

what about 3rd gens????

what about a grid heater delete?


Shoot me a pm -

Very nice, I like, I'll take one for the 3rd. gen, when will they be ready? -

AlCorr's Sig:

04.5, 2500, Flame Red "Dragon", SLT, QC, 2/WD, 48RE, 4:10, Quadzilla Commander, Xzillaraider 2 XZT, Rokk timing sensor, Banks High Ram Intake, Mechanical Oil Pressure Gauge, BD Auxiliary Lift Pump, AEM Brute Force w/Amsoil EAAU4090, Aero-Turbine 4040L, Navigation Sym, Firestone Air Bag, Hellwig Sway Bar, Spray/Liner, Factory SRT-10 Hood, Mag-Hytec Diff. & Tran. Titanium 5er

The 3rd gens will be ready in a week or so Ill post up when they are ready. Id like to get a few made then sell em so Im not behind and y'all get them asap!!!

Thanks
Ian -