P-pump 24v info*
#1
P-pump 24v info*
The 12v injector needs 53psi seat pressure to create 300BAR, the 24v injector needs 32psi seat pressure to create 300BAR. A difference of 0.005" installed height alters the opening pressure 30BAR on the 24v injector. So, to achieve the same rate of the 12v compressioin spring, a 24v injector would need the opening pressure set to ~ 180BAR, and this would soley be a crutch. Needless to say lowering the opening pressure to the common range of 12v injectors being 260-280BAR doesn't even come close. Opening pressure can play into the power that can be made with a certain size nozzle, lowering the opening pressure can lengthen or increase duration therefore increasing the injected quantity. However, this will decrease atomization and efficiencey past a certain point. Response is often better with a higher opening pressure, which is beneficial for a street application, even though the peak number may be a bit lower.
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
Renteria1217
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
04-16-2015 11:38 PM
B.k. Smith
12 Valve 2nd Gen Dodge Cummins 94-98
10
01-07-2015 02:29 PM