89-93 12V Cummins Tech Talk '89-'93 5.9L 12 Valve Cummins VE Engine Tech Articles

1989 - 1991 Ram Diesel Engine Specs and Part Numbers

 
Thread Tools
 
Search this Thread
 
  #1  
Old 05-05-2009, 07:27 PM
RSWORDS's Avatar
BOMBARDIER

Thread Starter
Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
Default 1989 - 1991 Ram Diesel Engine Specs and Part Numbers

General Engine Specifications

Injection Line Location, The cylinders are counted 1-6 starting at the front of the engine. this is the rear of the pump, Don't forget your pump does not sit up straight like this.

Name:  testphp.jpg
Views: 2823
Size:  37.1 KB

top left is cylinder 2. going clockwise from there: 6,3,5,1,4

The Firing Order For The 5.9 Cummins is 1-5-3-6-2-4
  • Engine: 5.9-Liter, OHV, Diesel Six-Cylinder
  • Type & Description: Six cylinder, in line, liquid cooled, turbocharged, intercooled
  • Displacement: 359 cu. in. (5.9 L)
  • Bore x Stroke: 4.02 x 4.72 (102.1 x 119.9)
  • Firing Order: 1-5-3-6-2-4
  • Engine Rotation as viewed from engine front: Clockwise
  • Valve System: OHV, 12 valves, solid sliding tappet lifter/followers
  • Valve Adjustment (engine cold)
  • Intake = 0.010"
  • Exhaust = 0.020"
  • Adjustment interval - 24,000 miles
  • Fuel Injection: Bosch VE High-pressure direct injection, mechanical
  • Fuel Pressure After Filter: 5-8psi
  • Max allowable fuel return line restriction : 20.4" Hg
  • Maximum Inlet Restriction to fuel transfer pump: 4" Hg
  • Construction: Cast iron block & head
  • Oil Capacity: 11 qt. (9.5 L) with filter
  • Minimum Oil Pressure @ Idle: 10 psi
  • Minimum Oil Pressure @ Rated: 30 psi
  • Regulated Oil Pressure: 65 psi
  • Oil Filter Bypass Diff. Pressure: 20 psi
  • Coolant Capacity: 24 qt. (22.7 L)
  • Battery: Maintenance-free, 1100 CCA

  • Recommended Fuel

    #1-D Diesel or #2 Fuel Oil (diesel) only.

    Under emergency conditions, 1K & 2K Kerosene, Jet-A, Jet A-1, JP-5, and JP-8 may by used if 5% lube oil is added to the fuel. DO NOT run the VP44 Injection pump on these alternate fuels without the lube oil - pump damage is likely without a lube additive!

    Frequently Used Part Numbers


    Fuel Filter
    Mopar 4429107
    Cummins 3834656
    Fleetguard FS1232
    Fuel Strainer
    Mopar 04762962
    Cummins 3847102
    FleetGuard 38454000-S
    Fuel Heater top quad ring gasket
    FleetGuard 3834185-S
    Oil Filter*
    Mopar Paper 05016547AC
    Cummins Paper 3942470
    Cummins Microglass 3865405
    Fleetguard Paper LF3959
    Fleetguard Microglass LF3552
    Fleetguard Stratapore LF3894
    Air Filter
    Mopar 4428308
    Cummins 3097072
    Fleetguard AF4555M
    Belt, Serpentine Drive - w/o A/C, Before 1/1/91
    Mopar 4536259
    Belt, Serpentine Drive - with A/C, Before 1/1/91
    Mopar 4536258
    Dayco 5080820
    Accessory Belt After 1/1/91
    Dayco 5080830
    Belt, Serpentine Drive - w/o A/C, After 1/1/91 w/Intercooler
    Mopar 4638766
    Belt, Serpentine Drive - with A/C, After 1/1/91 w/Intercooler
    Mopar 4638762
    Dayco 5080830
    Throttle Position Sensor
    Cummins 3621094
    Thermostat
    Mopar 44420970
    Cummins 3802273
    Lower Radiator Hose After 1/1/91
    Cummins 71595
    Lower Radiator Hose Before 1/1/91
    Cummins 71530
    Upper Radiator Hose After 1/1/91
    Cummins 71594
    Upper Radiator Hose Before 1/1/91
    Cummins 70540
    Throttle Rod Assembly
    Mopar 5011955A
    Throttle Rod End
    Cummins 3915106

    * LF3959 superseded LF3935, LF3885, LF3949 for all model years.
    Cummins 3942470 supersedes 3931470.
    Mopar 5016547AC - replaced 5016547AB
    Fleetguard LF3984 has been upgraded without a number change.
     

    Last edited by RSWORDS; 12-08-2009 at 07:45 PM.
      #2  
    Old 05-05-2009, 09:47 PM
    Richie O's Avatar
    Diesel Enthusiast
    Join Date: Jan 2009
    Location: New England
    Posts: 267
    Received 17 Likes on 14 Posts
    Default

    Bobby, the fuel pressure specs are confusing me. They seem high. I thought the spec for fuel pressure was around 5 to 8 psi.
     
      #3  
    Old 05-05-2009, 10:32 PM
    Woody35's Avatar
    Diesel Bomber
    Join Date: May 2008
    Location: PA
    Posts: 2,856
    Received 124 Likes on 117 Posts
    Default

    Originally Posted by RSWORDS
    [CENTER][U][SIZE="4"]

    [*]Max Fuel Pressure drop accross filter: 5 psi
    .
    looks like your thinking of this i think
     
      #4  
    Old 05-06-2009, 06:10 AM
    RSWORDS's Avatar
    BOMBARDIER

    Thread Starter
    Join Date: Mar 2007
    Location: Gloucester, VA
    Posts: 11,159
    Received 918 Likes on 537 Posts
    Default

    Originally Posted by Richie O
    Bobby, the fuel pressure specs are confusing me. They seem high. I thought the spec for fuel pressure was around 5 to 8 psi.
    Good Catch Richie, Looks like thats for 2nd gens.

    Changed it. Thanks
     
     




    All times are GMT -5. The time now is 11:08 AM.