Diesel Bombers SIGN UP NOW

National Association of Diesel Motorsports
Go Back   Diesel Bombers > Dodge Cummins > 6.7 Liter Dodge Cummins 07.5-UP
Sign in using an external account
Register Forgot Password?
Search


Registered Members don't see these ads. Register now it's free!

6.7 Liter Dodge Cummins 07.5-UP Discussion of 6.7 Liter Dodge Cummins Diesels

Welcome to Diesel Bombers Forums!
Welcome to DieselBombers .com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Diesel Bombers Forums community today!


i am looking at a single cab 2010 2500 witha g56 6 speed to put on the farm as a work horse. i have a 95 auto pushing 550hp with no problems and i want the same out of this 2010 MAYBE 750. what am ... JOIN NOW TO REMOVE TRACER

Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
  #1  
Old 07-09-2013, 09:45 PM
Diesel Fan

   
Question 2010 truck w/g56 manuel

i am looking at a single cab 2010 2500 witha g56 6 speed to put on the farm as a work horse. i have a 95 auto pushing 550hp with no problems and i want the same out of this 2010 MAYBE 750. what am i getting myself into? and how hard will it be to accomplish this goal?
Reply With Quote
  #2  
Old 07-17-2013, 04:36 AM
dodgeram082500's Avatar
Diesel Wrench
Status: 6000 pounds and short wheel base thanks Lazarsmith

   
Default

750 on a g56 is very doable I have both a 08 and 2012 both are over 700 HP. you'll definately have to buy a clutch ,you'll also want a tuner with a 2010 I'd recommend MCC due to Efilive not being out for it. to have a better chance of keeping the head gasket it place you'll end up needing custom tuning. box tuners are to rough on timing/cylinder pressure. also the custom tuning will help keep the g56 intact also they can take a lot ,but not in certain areas you can limit custom tuning to keep from pushing it to hard in these areas

dodgeram082500's Sig:2008 Regular cab 6.7l 4x4 (slightly modified by Lazarsmith)
Reply With Quote
  #3  
Old 07-17-2013, 11:48 AM
Diesel Fan

   
Default

how do i custom tune? the truck comes with the mini max tuner 5 inch straight pipe all the deletes. do i need head studs? valuve springs? what twin set up would be best for the towing part? and is a clutch all i need for the tranny? and what about injectors? as you can tell im new to electronics all i know is plug the tuner in and set it on 1 2 3 or 4 on a duramax
Reply With Quote
  #4  
Old 07-17-2013, 01:34 PM
dodgeram082500's Avatar
Diesel Wrench
Status: 6000 pounds and short wheel base thanks Lazarsmith

   
Default

If you have a minimax you just need to download MCC from h&s or talk to a custom tuner there's several folks that sell custom tuning. I personally use Lazarsmith's MCC tuning.

Sent from my DROID RAZR using Tapatalk 2
Reply With Quote
  #5  
Old 07-17-2013, 09:25 PM
Diesel Fan

   
Default

ok thanks what about the other stuff i asked? all i know is what to do with 12v's nothing with anything any newer
Reply With Quote
  #6  
Old 07-17-2013, 09:51 PM
dodgeram082500's Avatar
Diesel Wrench
Status: 6000 pounds and short wheel base thanks Lazarsmith

   
Default

You will likely need injectors to get your goal, I don't personally run a set of twins on mine. I run a s475 single. I have friends that run s472 all day while towing without issue. the s472-75 can make over 800 HP with no issues. the head studs are a good idea ,but im still on my stock head bolts so far with custom tuning. MCC is built into your Mini max ,you can pull the stock tune out and look at it without having to pay H&S for the unlock code ,but when you go to install the custom tune on the truck its 200 dollars last I checked plus the cost of your custom tune from your tuner.

On the trans it all depends I run a torque shield and GJ lite transmission fluid and all as been well. I believe with custom tuning you wouldn't need the torque shield up to 650 HP. It is good for peace of mind though
Reply With Quote
  #7  
Old 07-22-2013, 09:49 PM
Diesel Fan

   
Default

ok thanks!
Reply With Quote
 
 
 
submit to reddit
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search


 
All times are GMT -5. The time now is 09:12 PM.

Copyright And Legal Notice Links Of Interest

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Diesel Bombers ® - All Content Protected Under Intellectual Property Rights Law of Registered Trademarks
Reg. No. 3,494,401 Cls. 100, 101 & 104 Under Int. Cl. 38
USE AT YOUR OWN RISK WE HOLD NO LIABILITY FOR ANY CONTENT RIGHT, WRONG OR INDIFFERENT

Protected by Copyscape Duplicate Content Check