Need help on what size clutch
#1
Need help on what size clutch
I have the smarty s67me and my clutch is having a hard time handling stage 3. I am going to put a better clutch in myself but I am wondering what else i should replace while I am in there...I plan to get a edge attitude or another prorammer to stack with the smarty to what would you recommend I get? Thanks
#2
#3
#5
#6
I may also need a clutch. I have a 2007.5 with the 6.7 cummins, H&S mini max tuner and all the deletes. I only run it on the lowest setting cause it has plenty of power on that setting. I am wanting to replace the clutch and pressure plate this spring just to be on the safe side. I only tow about 10000 pounds at most, can someone recomend a good setup for me without breaking the bank. Ive heard about the dual mass and single mass clutches but hell I dont know what to get. Pickup is mostly a daily driver at best, most of the time it sits in the shop and I only drive it on weekends. It has the 6 speed tranny.
#8
Far as the clutch that should do you just fine. You may want to upgrade the hydraulics as well if they don't come with the new clutch already.
#10
i had the edge juice with attitude its a waste of money only thing good about it is the gauges you dont want to stack your truck you pretty much just get more smoke. the smarty can get way more power then the edge could ever think about. if you want power go for it in the correct ways. injectors turbo ect. turbo makes a huge difference just saying. and like hrd said EFI live is the best way to go lazarsmith can do some awsome tuning. with the dual disk you will have to replace the hydros your stockers wont push it