5.9L CR Performance Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection Related To Performance And Longevity

I need advice on safety wiring my waste gate closed.

Thread Tools
 
Search this Thread
 
  #1  
Old 12-19-2011, 03:25 PM
hawk's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2010
Location: Fort Campbell TN
Posts: 84
Received 1 Like on 1 Post
Default I need advice on safety wiring my waste gate closed.

What would be the benefit of having it closed all the time as well as the problems. All I want is more boost at lower rpms. I rarly go to max boost. So Im not worried about exceeding 42 lbs.
 
  #2  
Old 12-19-2011, 09:02 PM
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Join Date: Mar 2007
Location: Ash Flat Arkansas
Posts: 1,748
Received 107 Likes on 99 Posts
Default

doing that would not have any effect on low rpm boost, the wastegate dosnt open until 26psi
 
  #3  
Old 12-20-2011, 09:37 AM
hawk's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2010
Location: Fort Campbell TN
Posts: 84
Received 1 Like on 1 Post
Default

When does the wastgate close? I have a 6 speed so Its open in neutral.
 
  #4  
Old 12-22-2011, 04:09 PM
cerberus60's Avatar
Diesel Wrench
Join Date: Mar 2007
Location: Minco OK
Posts: 715
Likes: 0
Received 84 Likes on 76 Posts
Default

Originally Posted by hawk
When does the wastgate close? I have a 6 speed so Its open in neutral.
No its not. The WG is closed until the WG controller allows enough boost to the actuator to crack it open. Normally thats about 32 lbs and it holds 30 psi. The WG is completely closed until them. If the WG was open the turbo would never build any boost, engine would ramp fuel up, it would smoke like crazy, and the EGT's get real hot.

Depends on what your fueling mod does, the WG will open anywhere from 30 psi to 40 psi and hold thta much boost. If the WG controller goes bad it will max out anythwere from 20-26 psi of boost depending on how the actuator rod has been adjusted.

What kind of boos tnumbers are you seeing? The easiest way to get more boost is just crimp the WG actuator boost reference hose with a cheap pair of vice grips and call it good.
 
  #5  
Old 12-31-2011, 11:31 AM
hawk's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2010
Location: Fort Campbell TN
Posts: 84
Received 1 Like on 1 Post
Default

Im getting the max 42 psi.
 
  #6  
Old 12-31-2011, 12:11 PM
NadirPoint's Avatar
Diesel Bomber
Join Date: Aug 2009
Location: CO
Posts: 2,257
Received 186 Likes on 159 Posts
Default

Consider a Quadzilla boost fooler - very nice little bang for the buck mod on a late CR.
 
  #7  
Old 01-02-2012, 09:49 AM
hawk's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2010
Location: Fort Campbell TN
Posts: 84
Received 1 Like on 1 Post
Default

I havd a quad xzillarader 2. I tried adding a boost fooler to my last truck with a programmer on it and it had the oppisite effect.
 
  #8  
Old 01-02-2012, 10:28 AM
turbo2332's Avatar
Diesel Bomber
Join Date: Jun 2011
Location: Indiana
Posts: 2,171
Received 104 Likes on 101 Posts
Default

dont eliminate your wastegate. your drive pressures will go through the roof and your turbo will not last. fool it like stated above.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
six speed
12 Valve 2nd Gen Dodge Cummins 94-98
0
09-14-2015 09:19 PM
timmyd
Chevy/GMC 6.2L and 6.5L
5
06-08-2015 11:35 PM



Quick Reply: I need advice on safety wiring my waste gate closed.



All times are GMT -5. The time now is 03:02 PM.