CP3 Modifications You Can Do Yourself! - Page 2

SandDiesel · #16 02-26-2008, 12:23 PM

Anyone have input on obtaining metering valves as SuperTrucker asked? I'd like to try this myself when I do injectors but would like to have a spare. I would start with making minimal increases in all parts though and work my way up. Thanks for this thread by the way! -

**DangerousDuramax** · #17 02-26-2008, 12:47 PM

You're not going to find any. They arent sold as in individual part so the only place your are likely to locate one is at a shop that had some bad CP3 torn apart. -

SandDiesel · #18 02-26-2008, 11:05 PM

Is our CP3 built by Bosch? -

WinstonWolf · #19 08-01-2008, 08:24 AM

Originally Posted by Whitmore

CP3 Modifications you can do yourself!

... Great stuff, thanks! -

spooled05 · #20 09-06-2008, 12:48 PM

U can get new fca's from cummins for around 100 bucks i guess this is what u mean when u say
"metering valve" -

lasertech · #21 12-10-2008, 07:39 PM

Does anyone have the link to the pic of the valve after dremal cut. The link appears to be dead... -

DIESELDENT · #22 08-24-2009, 11:59 AM

Bump for a great write up. -

**JTProuhet** · #23 09-19-2009, 10:02 AM

Originally Posted by 231jasons

Super trucker thats what i was afraid of, the more people i see who have done this the more complaints i hear about surging.

Any one purchase a machined metering valve? Anyone done just the FCA and not the pump plate?

What can be done to the pump plate? -

**wyoranch** · #24 09-24-2009, 09:05 PM

So what kinda hp increases will this get you? Also, the pics of the valve after using the dremel tool dont seem to be working -

TXAustin · #25 09-27-2009, 02:08 AM

I want to learn more about this. Is the basic whole point of the mod to be able to get more fuel into the engine without having to buy a new CP3? I have been having some problems with about 5 seconds into WOT on level 6. My truck just kind of falls on its face like it ran out of fuel

-

Poppin Smoke · #26 10-05-2009, 08:10 PM

Industrial Injection has a 15% more volume kit for CP3s. Its only $350 and it is a R&R. I like the sounds of that. They have several different levels for CP3s mods. My 2 cents.. -

**wyoranch** · #27 10-05-2009, 11:54 PM

So is this just an upgrade or does it also replace wear parts in the pump? I think mine may be getting weak, it would be nice to kill two birds with one stone -

McAttk · #28 11-04-2009, 02:29 PM

Any one use an Arson kit? WICKED DIESELS, WICKED DIESEL -

LinkBacks (?) LinkBack to this Thread: http://www.dieselbombers.com/5-9l-cr-bombs-aftermarket/4928-cp3-modifications-you-can-do-yourself.html
Posted By	For	Type	Date
Common rail DIY Performance - Diesel Bombers - All Diesel Forum	This thread	Refback	01-16-2009 03:48 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Copyright And Legal Notice	Our Corporate Affiliates
Powered by vBulletin® Version 3.8.4 Copyright ©2000 - 2009, Jelsoft Enterprises Ltd. SEO by vBSEO 3.3.1 Diesel Bombers ® - All Content Protected Under Intellectual Property Rights Law of Registered Trademarks Reg. No. 3,494,401 Cls. 100, 101 & 104 Under Int. Cl. 38 vB Ad Management by =RedTyger=