top(small) turbo question
#1
top(small) turbo question
I just traded my dad, my phat shaft 62 for his 66 so he could use the 62 for a top turbo.
Well we flipped the manifold upside down, and the compressor housing hits the ATS manifold, and yes i re-clocked the housings. im not sure if im doing something wrong or if we need a spacer.
Also we need plumbing from a HT-60. so far no one wants to help me. i hope i can find someone.
Cody
Well we flipped the manifold upside down, and the compressor housing hits the ATS manifold, and yes i re-clocked the housings. im not sure if im doing something wrong or if we need a spacer.
Also we need plumbing from a HT-60. so far no one wants to help me. i hope i can find someone.
Cody
#4
HT60 will be a hard one to find plumbing for, and you will most likely be building a lot of it yourself. It is a reverse rotation turbo so if the flange on the exhaust housing is a t6 flange, a hot pipe for an HT3b would probably work. And actually, come to think of it, since you're going from a V-band style outlet on your secondary, rotation shouldn't matter as you can clock the hot pipe any direction you need.
I'm still thinking that you will probably have to do most the fab work yourself on the plumbing though.
Here are some good links for places to buy flanges and plumbing components.
ATP TURBO - The Premiere Provider of Turbocharging Components
AGP Turbochargers, Inc.
Dynaflex Chrome Muffler Stacks | Chrome Stacks | Rubber Intake Elbows | Donaldson Mufflers
Source Automotive Performance Diesel - Home
feel free to shoot me a PM if you have any questions.
Sean
#5
I also have an ATS manifold and even with a 1/2" spacer, it still hit. No problem with a spacer and the HX35 though.
Go with a thicker spacer or do as I did and get your grind on with the shoulder on the ATS. Since I had already coated the compressor housing, it was the least of 2 evils.
We have T3 and other spacers and twins parts in stock. Give Eric a call if you are looking for anything.
Dave
Go with a thicker spacer or do as I did and get your grind on with the shoulder on the ATS. Since I had already coated the compressor housing, it was the least of 2 evils.
We have T3 and other spacers and twins parts in stock. Give Eric a call if you are looking for anything.
Dave
#6
Not sure where you can get one though - we make our own divided T3 flanges.
#7
Thread
Thread Starter
Forum
Replies
Last Post
avatardvr
Ford Powerstroke 03-07 6.0L
18
08-08-2019 12:38 AM