i talked to my local tranny shop about rebuilding my tranny and he said every tranny he rebuilt for a dodge cummins he just did a factory rebuild and put a dacco converter in it and never had any problems...he claims the 47RE is a good transmission the torque converters are just weak....is this true? would a rebuild like this hold up?

dieselsmoke74's Sig:

2002 Dodge 3500 4x4, AT, 24V CTD, Edge Juice w/ Additude, BHAF w/outerwear prefilter, AirDog 150, Isspro gauges, 4" turbo back with 5" tip, Hankook DynaPro ATM's 285/75R16 w/2"spacers

Registered Members don't see these ads. Register now it's free!

Check into a tranny rebuild kit from bd. Its the same parts as there performance tranny but like a fifth of the price of there complete tranny. And you can get the same thing from dtt i believe. But you still need to buy a torque converter from them but your still way cheaper and will have a really good tranny that way thats will take alot of power

FarmBoy2's Sig:

Project FARMBOY. 2001 2500 Cummins QC LB,6 speed w/ a Valair SFI Dual Disc, Jammer 2's, Edge Juice w/ Hot Unlock, BHAF w/ Diamond Eye 4in. RCT Inc. 62/71/14 turbo. Thanks to Chad and Vinny at Alligator Performance and Bryan and Josh at Diesel Power Products.
Dynoed 406/857 at Shelleys automotive w/ stock turbo.Dynoed 466/941 at Shelleys automotive on 4/17/2010

i got a billet tranny with a triple disc dacco converter

diesel pap's Sig:

www.mightydiesel.com - Make Your Diesel MIGHTY !
877-354-7008
CLICK HERE TO SEE OUR SPECIALS!!!

Want The Best Prices You Have Ever Seen On Diesel Performance Product?
Click The Image Below!

http://www.shopatron.com/products/ca...57260.2114.0.0. Heres is bd link for there kits with prices.
Check goerend they might have a rebuild kit as well

---AutoMerged DoublePost---

My brother went the way your talking 2 years ago and now he need a new tranny again. Not saying this will happen to you but kits like bd's will be a better route in the long run. In my opinon. Spend alittle more money now and you wont have to fix it later.

I would go for more than stock with a converter. Upgrade to the red altos get a suncoast valve body and a good converter. If your planning on abusing the trans get an billet input at minimum. They are a good trans when properly built.

01quadcab's Sig:

01 edge drag comp, fass 150 with vulcan big line kit,amsoil front to back,custom cold air intake with s&b filter with compounds and trans by Jefferson State Diesel 665hp vp truck. 11.91 1/4 http://jeffersonstatediesel.com also a 99 5spd quad cab 4x4 edge juice with attitude, fass 95, afe intake, 4" lift lumber rack the basic work truck.

I personally would do a Suncoast Extreme Rebuild Kit, Suncoast Triple Disc Converter and Suncoast Valve Body.

lukesdiesel's Sig:

Big Dawg Injectors

DPF Delete Kits

$199 AFE Intake Kits

I wish i did that the first time. Now i dont agree with the altos and kolenes being necessary. But the convertor, valve body, and other internals NEED TO BE UPGRADED!!!!

lobsterman04's Sig:

99 cummins 2500, airdog150, coaltrain 150's, Adrenaline set to kill, 57mm s300. Masta performance trans, ATI convertor,with lock-up switch. U.S. Air Force 3E811. I'm on the Air Force BOMB squad!!

#K47. Fits 1994 - 2002 Dodge diesel and V10 transmissions. Turn your 47RH / 47RE transmission into our level 3 Extreme Duty Mega Viper transmission with this Combo Kit and receive a large discount for buying in quantity. You get the Alto Red Eagle master rebuild kit with a direct 5 clutch Power Pack and Kolene steels, extreme duty brass impregnated carbon fiber flex band, Fairbanks TransAction kit, billet triple clutch torque converter (#8DXX), performance 3-4 accumulator spring, heavy duty Sonnax low / reverse servo, Sonnax heavy duty / no leak intermediate servo cover, Mopar 5 to 1 ratio intermediate servo band lever, full time torque converter fluid feed valve, Mega Spring for more holding power in 1st - 2nd and 3rd, Superior heavy duty intermediate band apply strut. Regular Price $1794.00, Extreme Duty Combo Kit Price $1591.00, you save11.3%.



Add the Sonnax billet input shaft to the #K47 Combo Kit for $671.00.


We put this kit in a 47rh,and put it in to a first gen.It runs great a little bit of bugs at first,all smooth now.http://www.transmissioncenter.net/do...FSZo5QodsHT0Vw

turbo20psi's Sig:

..Hungry


A little here a little there.



Diesel Dawgs Performance
Unleash the Dawg!!
828-399-1556
www.DieselDawgs.com

The cost between altos and stock is less than $20

I did the BD uprgrade to include Billet flexplate, billet input shaft, billet triple disk TC, VB, Double deep pan and HD clutches for $6500 installed with the shipping of the parts. Buddy of mine did just a normal rebuild with a just a HD TC and had rebuild it 18 months later had to rebuild it again. The first one cost him $4400 with the TC, the second cost him $5000 because he did the full upgrade to match the TC. I have driven 1500 miles at 70mph+ at 27780lbs GVW and never got past 170deg even in the mountains. I love this trans.

01trailerpuller's Sig:

01 Cummins 4x4. Edge Juice w/Attitude, HTT Stage III quickspool hybrid HX35/40W, Airdog II 165, 40hp Edge jammers, Byrd's Diesel intake, B&D heavy duty auto trans with lockup, MBRP turbo back 4" with dual 4" black turn outs, Airaid cold air intake and Pac exhaust brake.
295RWHP 645RWTQ