All i want to do is get my high idle function setup, and any dealership around here wants $100 for it ..

I'm in lynnwood and would love to get this setup !

Thanks

Nick

Tweaker727's Sig:

2001 Dodge Ram 2500 2 Wheel drive 5.9 CTD 4" magna flow exhaust, GIANT aFe air filter, Fass " HPFP " W/O Filters and Big blue fuel line kit Schweitzer S300G Turbo Full Gauges, Injectors Believed to be stock.

I think if someone uploads their smarty into your truck, their smarty will only work on your truck because the program was uploaded to yours.. what im saying is one smarty-one truck, you cant upload several programs to several trucks using the same smarty you need one for each truck... Smartys are around $600, you could also check out Quadzilla Adrenaline for your truck, there are several tunes on it and some have the high idle feature.

Rooster24v's Sig:

1998.5 2500 4x4, 5.9 liter 24v Quad Cab S.B. SLT, Automatic (DTT Tranny!!!),HTB2 62/13 s.s. Turbo w/HX40 downpipe, Isspro Pryometer and 60 psi boost gauge, BD Low Fuel Pressure LED, Quadzilla Adrenaline, Airdog 150, Fireball 150's, Airaid BHAF, 4" MBRP Exhaust w/5" MBRP rolled tip, BD Intercooler Boots, 3.54 axle. Thanks Lukesdiesel!!

your right about the one tuner one truck thing, but when you put the smarty back to stock it put the updated dodge program in the ECM and wala you have high idle, then you can put it back on the other truck and your good to go

stkdram55's Sig:

Just an Inline 6 Cylinder

Only 2 defining forces have ever offered to die for you.....Jesus Christ and the American Soldier..
One died for your soul, the other for your freedom.

my dealer says you can't get high idle on an auto.

01quadcab's Sig:

01 edge drag comp, fass 150 with vulcan big line kit,amsoil front to back,custom cold air intake with s&b filter with compounds by Jefferson State Diesel 603hp vp truck. 12.38 1/4 http://jeffersonstatediesel.com also a 99 5spd quad cab 4x4 edge juice with attitude, fass 95, afe intake, 4" lift lumber rack the basic work truck.

stkdram55
That is not going to work. The way Smarty works, it upload the existing program and replace it with Smarty whatever level program. When you go back, the old program is going to get back into truck's ECM. No change!

MRowsh's Sig:

22 years Army Vet located in Noth Carolina. Adopted Southerner! And, loving it.
1. 1999 RAM-2500, 4X4 Loaded! Dual clutch/ Evil twin turbos, and Smarty too,
2. 2007 RAM-3500 MegaCab 6.7L SRW 4X4. Banks Ram Air Intake System, And SMARTY!
3. VW Jetta TDI 2005
4. 1979 PowerWagon D-200

Some people say it will work, i don't know,

And i figured high idle works on any 24V manual or Auto

That is not true at all. My buddy installed his Smarty on my 01 6 speed for me to try. We then took it off. The high idle flash and 3 cylinder flash remains with the truck and does not uninstall when you uninstall the Smarty. These features did not previously work on my truck and they are working to this day. At least thats the way it worked on my truck.

Dr. Evil's Sig:

DIESEL BOMBERS LEAD ADMINISTRATOR

CLICK HERE FOR SPONSORSHIP INFORMATION
CLICK HERE TO BECOME A PREMIUM MEMBER AKA BOMBARDIER
___________________________________________

98 12V quad cab 4X4 AND 2001 24V quad cab 4X4

The SMARTY will in fact leave the high idle function installed, that' about it though everything else goes back to stock or the SMARTY is left VIN locked if you don't and won't work on any other truck.

Some place in here is also a write up to install a high idle switch. I have the high idle flash on my truck but I also have a high idle solenoid that with the flip of a switch I can set my truck idle to high manually regardless of the temps. The manual method is the only way to go for me. I can set it to leave my truck runnin while I'm in and out of stores and keep it runnin warm and i always hated pluggin my truck in in the winter time cause the high idle would never kick in and the truck wouldn't warm up idling. With this I can turn it up and have it plugged in.

Uncle Bubba's Sig:

DIESEL BOMBERS ADMINISTRATOR

CLICK HERE FOR SPONSORSHIP INFORMATION
CLICK HERE TO BECOME A PREMIUM MEMBER AKA BOMBARDIER
_________________________________________

99 Quad Cab, 4wd, Drag Comp W/Pump Wire & Boost Elbow installed, K&N Air Canon, MBRP exhaust, Belt Drive Lift Pump and bottom Bulkhead feed from the tank, Isspro EV Pyrometer, Boost Gauge, Fuel Pressure Gauge, DT Pro Fab Trac Bar, South Bend 13-1.25 Con O Clutch, Ranch Hand Bumper, Borgeson Steering Shaft, Black Silicone Boots, 2" Lift Soft Ride Front Coils, Solenoid High Idle Kit, Bilstein 5100 HD Shocks, Rickson 19.5 Wheels w/Hancoock Rubber, HD Maxx Link Sway Bar Links, Superlift dual front stabilizer, EGR Brakes Front and Back, RV275 Injector's, Blue Chip VP44, Prodigy brake controller, B&W Gooseneck hitch and more I can't remember right now. Not to mention more to come I'm sure.
374.2/846.7 at 30psi

AND the 3 cylinder idle as well.

Giggty. so no one has a Smarty out here in WA ?

I am sure we can find a guy that still has a 2nd gen unit around. There's racing in Portland this weekend and you might find some guys at our BarBQue that can help you out. I only have new units on the shelf at the shop.

Dave

Fishin2Deep4U's Sig:

'02 Dodge CTD - Mostly stock.

Vulcan Performance

Sales - Dave Conrad

Direct line 503-970-6712


Fight N Fish Guide Service

Ahh man, whens the races in portland ( Days and times )

i may just have to buy my self a smaty when it comes around to buying time,

What can you get em' for ?

Nick

If you buy one lmk I'll run up your way and we can setup my high idle....... haha

nosparkCummins's Sig:

2000 dodge 2500 Factory S.O. 6 speed. Non 53 block, Full gauges aFe stage 2 intake, expandit budget 5" muffled exhaust, Mitusa Pump 17 psi at idle.