How do you like your PSC and which one did you go with? -

00' Quad Cab's Sig:

Jason Hayes, Aberdeen WA

2000 Quad Cab 4x4 LB CTD Auto

Once I talked to the folks at PSC there is only one rated for the Diesel Engine Trucks. The rest are for Gas engine only and they don't recommend the light valving one for anything used on the road. So this kinda narrowed the choice down pretty good. Wish I could could tell you how well it works but it's still sittin on the bench. Spent some days puttin up Oak fencing and for the last 3 days been to sun burnt to even put a shirt on. -

Uncle Bubba's Sig:

99 Quad Cab, 4wd, Drag Comp W/Pump Wire & Boost Elbow installed, K&N Air Canon, MBRP exhaust, Belt Drive Lift Pump and bottom Bulkhead feed from the tank, Isspro EV Pyrometer, Boost Gauge, Fuel Pressure Gauge, DT Pro Fab Trac Bar, South Bend 13-1.25 Con O Clutch, Ranch Hand Bumper, Borgeson Steering Shaft, Black Silicone Boots, 2" Lift Soft Ride Front Coils, Solenoid High Idle Kit, Bilstein 5100 HD Shocks, Rickson 19.5 Wheels w/Hancoock Rubber, HD Maxx Link Sway Bar Links, Superlift dual front stabilizer, EGR Brakes Front and Back, RV275 Injector's, Blue Chip VP44, Prodigy brake controller, B&W Gooseneck hitch and more I can't remember right now. Not to mention more to come I'm sure.
374.2/846.7 at 30psi

My trucks got the BD Steering Box Stabalizer and my steering wheel is very tight. -

lukesdiesel's Sig:

Diesel Dawgs Performance

Unleash the Dawg!!

828-399-1556

www.DieselDawgs.com

Expandit Exhaust Specials

6.7 Cummins XRT Race Tuner

HP Race Injectors

Anyone running an AGR box?

My truck is sitting on a lift having a BUNCH of front end work done, need to make a decision on a steering box (don't mean to hijack). -

Be sure to check out my other thread with everything I just did on a complete front end rebuild in case it gives ya any ideas. Front End Rebuild -

AGR boxes are good as well. I havent read much about them though. -

GRI's Sig:

04.5 dodge Smarty POD, Autometer NV gauges, 5" xpandit exhaust with muffler, AFE montser intake with amsoil nano filter.

Got the gear changed out yesterday. Truck drives like a dream now. Steers easier and more responsive then the 07 I drove for a few days. This thing used to make my shoulder sore to put many miles on between the hard steering and having to constantly be correcting it just to go in a straight line. Now it tracks exactly straight down the road and steers with a finger. Now I have to get used to this and trying not to oversteer the truck. I was hopin for an improvement but never imagined it would make this big a difference. This PSC gear is incredible. I'm a happy camper!!!!! -

Good news!!!!

Now, I MIGHT drop some dollars. I wonder if I should just try to clean out my ps pump or replace it too? sometimes, just after I start, it's hard to steer out of a parking spot... but rarely after that. -

AndyMan's Sig:

1999 2500 QC/LB Pictures 4x4 NV-5600 4.10's, Full FASS Setup, Edge HOT Juice/Attitude, Custom Zoom VT clutch, Bilsteins, DSS, DT Trackbar, Silverline 409 Exhust, BHAF, Jacobs E-Brake, Weatherguard 117-5-01 saddle box, XRF Ball Joints

congrats, I figured that was your problem. -

I sent PSC an email asking them if the gear that Uncle Bubba bought will be ok to use with a hydraulic winch.
I haven't heard back yet. -

Marine's Sig:

Mike

SSgt USMC

2001.5 2500 4x4 QC.Vulcan Fuel System, GDP Walbro pump, Adrenaline/Pulse, HTB2 62/13 SS, DDP 95 HP Injectors, HTT Pulse Manifold, Silicone boots, Mag-Hytec, BMK-11 Bypass, Amsoil throughout. NRA Member and Instructor.

Become a BOMBARDIER and be qualified for give-aways, see hidden Forums and more!

I never did get a response to an e-mail I sent them but if you call they answer your questions on the spot. I've found this to be the case with several reputable shops I've tried to deal with. -