Road Ranger - 10 speed
#1
#3
#4
What bellhousing does it have? I have an industrial 5.9 that I'm putting in my truck and it has a massive Eaton 6 speed behind it. The bell housing adaptor might be what you need, and I don't know about the input shaft yet. When I break it apart here in a couple weeks I can let you know if it would work to couple your trans. As for driveline, you are going to need a divorced transfer case if you are running four wheel drive and likely a special jackshaft or coupler between the tranny and t-case. If you use a divorced NP205, you likely won't need much more except shorten the rear shaft and lengthen the front.
#6
Now that I think about it, I agree with tater...you're gonna need a lot
#9
#10