12V Boost Gauge Install
#1
12V Boost Gauge Install
this aint nothin bad but makin me angry. i have just recently bought my gauges for my truck however i am haveing trouble finding the pressure port for the boost gauge line and where it connects im not sure and have never installed this kinda stuff. any help i would like very much.
dodge 96 4x4 stocker straight pipe
dodge 96 4x4 stocker straight pipe
#3
This is easy...:
Boost Gauge Installation Dodge Cummins Turbo Diesel 1991-1998 12 Valve (Intercooled) - the above pic is of a first gen 12V, the procedure is the same for a second gen 12V.
1. Locate and remove the 1/8" NPT pipe plug (see pic) on the driver's side of the intake manifold.
2. Install the fitting and connect the hose making sure that the hose fits snug but does not pinch.
Alternately, you can drill and tap the intake manifold.
Boost Gauge Installation Dodge Cummins Turbo Diesel 1991-1998 12 Valve (Intercooled) - the above pic is of a first gen 12V, the procedure is the same for a second gen 12V.
1. Locate and remove the 1/8" NPT pipe plug (see pic) on the driver's side of the intake manifold.
2. Install the fitting and connect the hose making sure that the hose fits snug but does not pinch.
Alternately, you can drill and tap the intake manifold.
Last edited by Dr. Evil; 07-09-2008 at 05:24 PM.
The following 2 users liked this post by Dr. Evil:
gen24x4 (07-10-2008),
Ironworker94Dodge (12-29-2012)
#4
#5
#6
But, I still prefer the air horn for my tap location in all applications. I have taken noisey gauges and they can quiet down from just the move of monitoring point.
Dave
#7
#8
hey thanks guys but the wires for all the guages r pissin me off. i shoot weapons not play connect till it works. but i didfind that port on the engine like you said i will tap that and just have an audio store or some one who knows wires to fix this mind game for me.
next step 70 hp injectors and jake brake with trans lock.
after that banks power pack or somethin just as good for a hell of alot cheaper but with the split intake manifold like banks manifold for 96 dodge diesels.
next step 70 hp injectors and jake brake with trans lock.
after that banks power pack or somethin just as good for a hell of alot cheaper but with the split intake manifold like banks manifold for 96 dodge diesels.
#9
#10