5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

Turbo Problem..I think

Thread Tools
 
Search this Thread
 
  #1  
Old 09-23-2011, 08:53 AM
PStevens's Avatar
Newbie
Thread Starter
Join Date: Sep 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Turbo Problem..I think

I have an 06' 3500 MegaCab Dually with the Edge Juice w/ Attitude programmer, 4" S&B cold air intake and exhaust. I use this truck mainly for pulling a 41' living quarters horse trailer so HP and Torque is a must. Recently I have noticed a hollow air sucking noise coming from my turbo (I think) at about 20 psi boost, 80-90% load, and around 2000 rpm.

I haven't lost any boost, but I have noticed an increase in my EGTs and also my eng temp. Is it possible that I more or less "stall" the turbo and have reached its max output?
 
  #2  
Old 09-23-2011, 10:22 AM
dangerous1965's Avatar
Diesel Bomber
Join Date: Dec 2008
Location: Escondido CA
Posts: 1,713
Received 111 Likes on 105 Posts
Default

Smoke? Dirty air filter? Sure it's a sucking noise?
 
  #3  
Old 09-23-2011, 11:52 AM
PStevens's Avatar
Newbie
Thread Starter
Join Date: Sep 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

No smoke, cleaned the filter, and the more I listen to it the more it sounds like metal on metal.
 
  #4  
Old 09-23-2011, 08:36 PM
tangodown's Avatar
Diesel Fan
Join Date: Sep 2011
Location: Montana
Posts: 19
Received 2 Likes on 2 Posts
Default

I have the same noise coming out of my 03 5.9HO, I asked the local diesel guy and he thinks it is a boost leak somewhere on the intercooler boot... hopefully will know more next week when he gets it in the shop.

Keep me posted if you find out anymore on your end, I'll let you know how mine ends up
 
  #5  
Old 09-24-2011, 08:28 AM
dangerous1965's Avatar
Diesel Bomber
Join Date: Dec 2008
Location: Escondido CA
Posts: 1,713
Received 111 Likes on 105 Posts
Default

Pull the intake boot off and check your shaft play. In and out a little is ok up and down is not. Do you see any rubbing marks by the fins? Does it spin freely? Then power brake it and listen and look Pick someone you trust! 10psi should be enough to hear it! STAY AWAY FROM THE FRONT OF THE TRUCK WHEN DOING THIS IN CASE YOUR TRUSTED HELPER SLIPS!
 
  #6  
Old 09-25-2011, 12:51 AM
PStevens's Avatar
Newbie
Thread Starter
Join Date: Sep 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by dangerous1965
Pull the intake boot off and check your shaft play. In and out a little is ok up and down is not. Do you see any rubbing marks by the fins? Does it spin freely? Then power brake it and listen and look Pick someone you trust! 10psi should be enough to hear it! STAY AWAY FROM THE FRONT OF THE TRUCK WHEN DOING THIS IN CASE YOUR TRUSTED HELPER SLIPS!
Ok, I did that, no side to side no in and out some up and down But figure this out, pulled the trailer tonight and had the programmer in STOCK. Gunned it from a dead stop and couldn't get the same noise. WTF
 
  #7  
Old 09-25-2011, 07:26 PM
dangerous1965's Avatar
Diesel Bomber
Join Date: Dec 2008
Location: Escondido CA
Posts: 1,713
Received 111 Likes on 105 Posts
Default

It may be the edge! I have a smarty POD 06 for 600. shipped! Let me know when your ready to move up
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
avatardvr
Ford Powerstroke 03-07 6.0L
18
08-08-2019 12:38 AM
Hogridenfool
6.7 Liter Dodge Cummins 07.5-12
3
11-20-2017 04:37 PM
n2brk
6.7 Liter Dodge Cummins 07.5-12
4
02-21-2015 09:05 AM
GreenDieselF
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
10-20-2014 02:05 PM



Quick Reply: Turbo Problem..I think



All times are GMT -5. The time now is 03:23 AM.