Ok, my cruise quit

When i hit the cruise "on" button the light on the dash says "cruise" but when i hit "set" nothing happens. I had the same thing happen on my '98 and it was a vaccuum line, but i figure these things are all electronic now, but i really have no idea.

Thanks for any suggestions -

wyoranch's Sig:

'03 quad cab 4x4 swb laramie.
Edge HOT juice w/att. Full gauges. Billet tranny. S&B cold air intake

'91 GMC Topkick Cat 3116 w/a 48' dropdeck trailer. XM Radio, sleeper.

could be in the switch .......or my bet wo9uld be the clock spring inside the wheel -

Whit's Sig:

* 01 Cummins/Dodge/HO/6 speed*275 injectors*PDR 35 turbo w/14cm housing & high pressure boots*HTT 3 piece ported exhaust manifold*Progaurd 7 with prefilter*Edge Comp*Fass II*Southbend con OFE*Jacobs brake*5"Stacks Big ens*E/F shift knob w/2low & brake switch*10 Gages*KW Ram air System cab controlled*Rickson 19.5x265's*True speed calibrator*Rancho 9000's*DT track bar*DSS steering stabilizer*KW Side impact rails*KW Traction Bars*Toolbox/fueltank 60 gal Combo*Mag High Tech Diff Cover*Ranchand bumpers*Grover air horns*Rear Wheel Cylinder Upgrade DYNO 375 Horse 941 Torque

Always remember...when life hands you Lemons,ask for Tequila and Salt and call me over!

No, thats much too expensive to be the problem. It must cost me less than $20 to fix, thats the rules -

it should still be under warrenty????????? -

Nope, 160k miles. Do you know if the cruise system has vacuum lines like on 2nd gens? -

I dont think so............all electronic to the best of my knowlege.......but I have been wron b4 -

Mine did the same thing, i replaced the brake switch and did nothing i found out if i pulled up on the brake pedal with my foot it would work,... sounds cheesy but it worked for me. -