5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

Cranks but wont start.

Thread Tools
 
Search this Thread
 
  #1  
Old 03-13-2011, 03:53 PM
91cumminER's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2010
Location: medway,ohio
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Question Cranks but wont start.

Well last night i parked my truck and went to leave this morning and it wouldnt start.figured the batteries were low put a charger on em..didnt work so from there i took off the quadzilla and back to stock that didnt work..i also opened the valve on the pump..fuel came out..then i checked the injectors to make sure they were getting fuel and they were..still would just crank!!! I wasnt even driving it hard before i parked it got up to 55 mph and only about 4 mile drive...what could be the problem?rail pressure too low?
 
  #2  
Old 03-13-2011, 10:18 PM
MurphyStrut's Avatar
Diesel Fan
Join Date: Feb 2009
Location: Jones, OK
Posts: 89
Likes: 0
Received 3 Likes on 3 Posts
Default

Try putting some SeaFoam in the fuel filter canister. Mine was doing the same thing and would only start with SeaFoam in the fuel filter canister. It ended up being the injectors. hope you're luckier than me!
 
  #3  
Old 03-13-2011, 10:44 PM
Red_Rattler's Avatar
High Tech Redneck

Join Date: Nov 2007
Location: Columbus WI
Posts: 6,730
Received 496 Likes on 397 Posts
Default

miles? anything ever been replaced? No cel?
 
  #4  
Old 03-14-2011, 06:08 PM
91cumminER's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2010
Location: medway,ohio
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default

It has 81k on it..we r thinking maybe fuel filter gonna try this evening after work..I hope its not either of the pumps or injectors

---AutoMerged DoublePost---

welp..put a new fuel filter in but that wasnt the prob...hooked up obd2 to it and my quadzilla threw the mass air flow sensor code,fuel pressure and map sensor..cleared the codes checked rail pressure on high side and low side everything is fine now..we dont know why it went crazy like that!!

---AutoMerged DoublePost---

welp..put a new fuel filter in but that wasnt the prob...hooked up obd2 to it and my quadzilla threw the mass air flow sensor code,fuel pressure and map sensor..cleared the codes checked rail pressure on high side and low side everything is fine now..we dont know why it went crazy like that!! The fuel pressure was right at 6000psi so its about prefect!
 

Last edited by 91cumminER; 03-14-2011 at 06:08 PM. Reason: Automerged Doublepost
  #5  
Old 03-14-2011, 10:17 PM
MurphyStrut's Avatar
Diesel Fan
Join Date: Feb 2009
Location: Jones, OK
Posts: 89
Likes: 0
Received 3 Likes on 3 Posts
Default

Awesome man! glad you figured it out.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rusher48
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
07-02-2020 08:39 AM
dfish001
5.9 Liter CR Dodge Cummins 03-07
7
03-30-2015 03:07 PM
Rusher48
Diesel In Distress - Support Ticket
7
02-20-2015 05:19 PM
Cloadkicker
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
11-09-2014 02:33 PM
Tyler_302
Ford Powerstroke 03-07 6.0L
6
10-22-2014 07:08 PM



Quick Reply: Cranks but wont start.



All times are GMT -5. The time now is 06:00 AM.