5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

OBD CODES P2127 AND P0483 0N 2004 3500

Thread Tools
 
Search this Thread
 
  #1  
Old 12-11-2009, 07:57 PM
jd2510's Avatar
Newbie
Thread Starter
Join Date: Dec 2009
Posts: 2
Received 0 Likes on 0 Posts
Default OBD CODES P2127 AND P0483 0N 2004 3500

I KEEP GETTING THESE 2 CODES IN COLD WEATHER THEN THAY GO AWAY AFTER A DAY ARE SO . I KNOW THE PO483 IN THE CLUTCH FAN WHAT DO I CHECK FOR THE P2127
 
  #2  
Old 12-11-2009, 08:04 PM
wildbill's Avatar
BOMBARDIER

Join Date: Jul 2007
Location: Billlings, MT
Posts: 12,808
Received 667 Likes on 553 Posts
Default

P2127 - Apps 2 Voltage Too Low

APPS
ECM
(K29) APPS NO. 2 SIGNAL CIRCUIT OPEN
(F856) APPS NO. 2 5-VOLT SUPPLY OPEN
(K29) APPS NO. 2 SIGNAL CIRCUIT SHORTED TO GROUND
(K29) APPS NO. 2 SIGNAL CIRCUIT SHORTED TO OTHER CIRCUITS
(F856) APPS NO. 2 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
(F856) APPS NO. 2 5-VOLT SUPPLY CIRCUIT SHORTED TO OTHER CIRCUITS
INTERMITTENT CONDITION

Remove the connection under the hood (the APPS is on top of the CP3 pump, drivers side) and clean it up, then let it dry.
 
The following users liked this post:
jd2510 (12-11-2009)
  #3  
Old 12-11-2009, 08:12 PM
jd2510's Avatar
Newbie
Thread Starter
Join Date: Dec 2009
Posts: 2
Received 0 Likes on 0 Posts
Default

THANKS I WILL GIVE IT A TRY
 
  #4  
Old 12-20-2009, 06:09 AM
haring164's Avatar
Diesel Fan
Join Date: May 2008
Location: new jersey
Posts: 14
Likes: 0
Received 1 Like on 1 Post
Default

im having the same problem and have checked the connection on the cp3 pump multiple times with no sucess as well as replace the entire accelerator petal unit with. any ideas where to go next?
 




All times are GMT -5. The time now is 09:28 PM.