Common Rail Help.....

**LOGANSTANFORTH** · #1 08-24-2008, 10:41 AM

buy here at the shop is looking at a 2004 325 horse truck automatic 4x4 crewcab long bed........what can ya do to it for 3K.......i got a total of 5K budget but he wants a lift wheels and tires also....... -

2500HeavyDuty · #2 08-24-2008, 11:26 AM

maybe tc and vb and upgrade with a big tuner -

**Redpatcher0481** · #3 08-24-2008, 11:29 AM

Airdog

-

SOUTHERN GA SMOKE · #4 08-24-2008, 03:26 PM

airdog 150 and a set of 50-9- horse injectors, and that should have you pretty close to 3K..
what is he wanting to do to the truck? -

skynyrd · #5 08-24-2008, 03:43 PM

leveling kit - 100
35" tires -800-900
smarty- 600
tc- 1000
vb- 500
rims-1000
62mm turbo 1500
diy cp3 mod-free
that's $5,500 total
and about 500-550 to the wheels -

**LOGANSTANFORTH** · #6 08-24-2008, 08:58 PM

Originally Posted by skynyrd

leveling kit - 100
35" tires -800-900
smarty- 600
tc- 1000
vb- 500
rims-1000
62mm turbo 1500
diy cp3 mod-free
that's $5,500 total
and about 500-550 to the wheels

tires are going to run about 275 a piece, lift kit was 700 because he wants a 5 inch but i think that is too much lift for 35's, i think he could get away with a 3 inch leveling kit but it depends on the truck cause i could barely get 33's on a buddy of mines 3rd gen with a leveling kit, rims are going to be 600 cause he only wants black 17's........i havent priced anything for a common rail in a while cause my buddy sold his so i stopped looking at stuff for them....... -

skynyrd · #7 08-24-2008, 09:31 PM

since it sounds like he has about 2500 bucks left. i would do:
smarty- 650 new 500 used out of the classifieds normally
torque converter(triple disc)- 1000-1200
valve body- 500
edge ez or mp8 (pressure box)- 385-540 new edge ez can be found in classifieds for 250-300
that will still put the truck around 500hp -

**MRaynor** · #8 08-24-2008, 09:43 PM

Originally Posted by LOGANSTANFORTH

tires are going to run about 275 a piece, lift kit was 700 because he wants a 5 inch but i think that is too much lift for 35's, i think he could get away with a 3 inch leveling kit but it depends on the truck cause i could barely get 33's on a buddy of mines 3rd gen with a leveling kit, rims are going to be 600 cause he only wants black 17's........i havent priced anything for a common rail in a while cause my buddy sold his so i stopped looking at stuff for them.......

How do you figure that? I have right at 33s under mine now and it is sitting stock as can be. I have no problems at all with rubbing at full lock. Your tire price is very cheap too. -

skynyrd · #9 08-24-2008, 09:51 PM

i have 315/70R17's(34.5") right now on h2 wheels with no rub sitting stock! my 35x12.5 would rub with the stock rims at full tilt with a 2 1/2" inch pro-comp leveling kit and 2" blocks in the rear. its the tire width and rim back spacing that makes the difference. -

**LOGANSTANFORTH** · #10 08-25-2008, 03:49 AM

all trucks are different.....we put 305/70/17 MTR's on it with 17x9 eagle alloys and a 3 inch cup......we still had to trim.......that was on my buddies 2003 low output common rail regular cab long bed.........

one box/reprogrammer is enough for this truck, he will be pulling a boat, 4 wheeler, or single car trailer when he is towing.....he dont needs a monster, just some good stuff to make it tow and run a little better.......

those tire prices are for Toyo Open Country MT's in 35x12.50x17......i know a place that sells them cheap.......and they are load range E...... -

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Copyright And Legal Notice	Our Corporate Affiliates
Powered by vBulletin® Version 3.8.4 Copyright ©2000 - 2009, Jelsoft Enterprises Ltd. SEO by vBSEO 3.3.1 Diesel Bombers ® - All Content Protected Under Intellectual Property Rights Law of Registered Trademarks Reg. No. 3,494,401 Cls. 100, 101 & 104 Under Int. Cl. 38 vB Ad Management by =RedTyger=