5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

Green light on injectors

  #1  
Old 02-05-2016, 09:37 PM
CumminsCoalRoller24/7's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Nov 2014
Location: San Antone - Tx
Posts: 422
Received 26 Likes on 25 Posts
Default Green light on injectors

Any one dealt with Randall's performance inc? They have 100hp Bosch injectors +/-1 balance rating tested by exergy for as good a price I've seen- link is here.

Bosch Motorsport 100 hp Injectors randalls-performance

Also would doing the Bosch high pressure feed tubes be worth the extra $300? I replaced 2 leaking ones about 20k ago, my stock injectors are cranky at 216xxx!! I'm excited to get her feeling better but Don't want to make a decision I'll regret! Any info on Randall's or exergy is appreciated!
 
  #2  
Old 02-05-2016, 11:56 PM
11B/11C's Avatar
Diesel Enthusiast
Join Date: Sep 2015
Posts: 271
Received 18 Likes on 17 Posts
Default

exergy are at the top if not top of the line. i would choose them or 100hp injectors from bms. exgery makes the nozzles and puts them on bms injectors. randalls is an exergy dealer, so i think you would be fine buying from them. here is a list of exergy dealers. Exergy Performance
 
  #3  
Old 02-17-2016, 06:34 PM
CumminsCoalRoller24/7's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Nov 2014
Location: San Antone - Tx
Posts: 422
Received 26 Likes on 25 Posts
Default

Ric was great at exnergy but ended up going with DAP and ordering from jkidd on the forum here. Price was cheaper from them and have heard all good things. Install will be this weekend! First rodeo with injectors so a little nervous!
 
  #4  
Old 02-19-2016, 10:51 AM
11B/11C's Avatar
Diesel Enthusiast
Join Date: Sep 2015
Posts: 271
Received 18 Likes on 17 Posts
Default

i got mine from DAP as well. its a good ideal to change your feed tubes when you change your injectors. injectors are easy to change, just make sure you are clean about it. while you are in there, you might as well do the valve lash as well.
 
  #5  
Old 02-21-2016, 06:21 PM
CumminsCoalRoller24/7's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Nov 2014
Location: San Antone - Tx
Posts: 422
Received 26 Likes on 25 Posts
Default

Put em in yesterday- took longer than I thought about 7 hrs, was overly methodical with keeping all in order. Doesn't help having to climb up and down over my bumper! Removing hook from between 5&6 saved lots time after fighting with it for a while. After I started it sounded like &$?! Since exhaust valve had become out of place. Remove hook and double check valve position before buttoning her up and should be good tips for others!
 
  #6  
Old 03-06-2016, 09:51 PM
Oatmealman's Avatar
Diesel Fan
Join Date: Jun 2012
Location: Littleton Co
Posts: 21
Received 2 Likes on 2 Posts
Default

I just put a set of bms +50 in my early 04,love the way they run.I had a bad set of feed tubes that fed my injectors large metal shavings,even though it was my fault ric at exergy took care of me and gave me a big discount on the cleaning and balancing.running a smarty on sw7 trq3 tm2 rp2 and she runs like a raped ape and just barely hazes on a stock charger.
 

Last edited by Oatmealman; 03-06-2016 at 09:53 PM.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:04 PM.