48Re Issues
#1
48Re Issues
I have an 05 dodge 3500 diesel. I am having problems with the truck shifting between drive and second. looking at the shift selector inside the cab it erratically flickers between drive and 2nd. I have replaced the nuetral safety switch gov press sensor and solenoid but to no avail. it seems to be stumping everyone. driving if you watch the indicator the circle just flashes back and forth quickly. getting annoyed quickly. Has anyone ever had this happen?
#2
#3
#4
#5
#6
Do you have any mods, multi-stage programmer(s) stacked or not, that may alter trans shift patterns? If so, remove it/ them, and see if that clears up anything. Just tossing it out there.
---AutoMerged DoublePost---
Also check for trouble codes, and check all wires and connections at the transmission, as well as cleaning all ground contacts. There are several in the engine compartment.
---AutoMerged DoublePost---
Also check for trouble codes, and check all wires and connections at the transmission, as well as cleaning all ground contacts. There are several in the engine compartment.
Last edited by Bigg Redd; 01-26-2013 at 11:07 PM. Reason: Automerged Doublepost
#7
#8
#9
Did u ever have this problem resolved !??
I have an 05 dodge 3500 diesel. I am having problems with the truck shifting between drive and second. looking at the shift selector inside the cab it erratically flickers between drive and 2nd. I have replaced the nuetral safety switch gov press sensor and solenoid but to no avail. it seems to be stumping everyone. driving if you watch the indicator the circle just flashes back and forth quickly. getting annoyed quickly. Has anyone ever had this happen?
Last edited by JCASEY; 06-20-2014 at 02:09 PM. Reason: Miss spelling
Thread
Thread Starter
Forum
Replies
Last Post
Ric Stokes
Ford Truck and Powerstroke Turbo Diesel Forum
1
08-31-2015 06:58 AM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM