Between a rock and a hard place.
#1
Between a rock and a hard place.
Just blew my turbo and I'm trying to decide what turbo to go with. This will be for an occasional towing, daily driver application. I don't really have any HP goals at this point I just need a SOLID reliable rig with my current set up. Money is tight as usual so all I can afford is a turbo and down pipe if necessary. The options I am considering are:
63/65/14
63/68/14
62/65/14 (with stock hp sticks)
This was determined by recommendations made by board members.
Disclosure: I am new to the diesel world so please pardon my ignorance on the topic.
63/65/14
63/68/14
62/65/14 (with stock hp sticks)
This was determined by recommendations made by board members.
Disclosure: I am new to the diesel world so please pardon my ignorance on the topic.
#2
I don't mean to add more choices but I have the Thunder 330 from II and LOVE it. It's a 62/74/14 I too daily drive and tow a 20ft gooseneck with a off road truck (82 f150 1 tons full cage on 38s). Its not too slow to spool and will handle your mods. The install is pretty easy, all you need is the Hx40 downpipe and its a direct fit. Not too much info out there on these but all I could find when I bought mine were good.
#3
do you know about where you are spooled up ? Im trying to be at 1800rpm's or less just came across a 64/71/14 that is rated at about 1800-2000 which i am going to add to my list of options.
---AutoMerged DoublePost---
slight tweaks to my options ...
62/65/14 (with Stock Hp Sticks)
63/65/14 (with 100hp sticks)
63/68/14 (with 100hp sticks)
64/71/14 (with 150hp sticks)
---AutoMerged DoublePost---
slight tweaks to my options ...
62/65/14 (with Stock Hp Sticks)
63/65/14 (with 100hp sticks)
63/68/14 (with 100hp sticks)
64/71/14 (with 150hp sticks)
Last edited by outcast420; 12-02-2012 at 02:55 PM. Reason: Automerged Doublepost
#4
Mine will start to spool about 1600rpm, and when it does it really goes. I run my smarty on sw9 all the time and have never seen over 1200-1300 on the egt gauge. I also emailed industrial injection and was told it flows 1050 CFM of air, incase you need that info too.
Last edited by looseskrew; 12-02-2012 at 03:00 PM.
The following users liked this post:
outcast420 (12-02-2012)
#6
Thread
Thread Starter
Forum
Replies
Last Post
DC_DC41
12 Valve 2nd Gen Dodge Cummins 94-98
2
07-16-2015 09:56 PM
Diesel Bombers
Latest Automotive Industry News
0
06-16-2015 08:00 AM
Whitelite
12 Valve 2nd Gen Dodge Cummins 94-98
0
12-02-2014 05:47 PM