99 5.9 starter problems
#1
99 5.9 starter problems
I just finished replacing the starter contacts and plunger with the kit from Geno's Garage due to my starter only clicking when turning the key to crank the engine. Now when I turn the key to on, before even trying to crank the engine, I hear a strange noise (sounds like starter motor spinning without engaging with flywheel). It only lasts about a second, and when you turn the key the engine cranks and runs normally. Has anyone else had this issue, or know what would've caused this?
#2
#5
#6
Re: 99 5.9 starter problems
It was simple. 10mm 12pt socket with a 10" extension will get the top bolt out. I finished the entire job, removed starter, replaced contacts and plunger, and reinstalled starter in about half an hour. Strange enough, the odd sound I started this thread about quit about the 5th time I started the truck and hasn't done it since.
#7
Thread
Thread Starter
Forum
Replies
Last Post
klein444
Chevy/GMC 6.2L and 6.5L
13
06-20-2015 11:48 PM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
nevadagramm
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
10-17-2014 07:59 PM