Normal?
#1
#2
#3
Re: Normal?
That's probably a direct reflection of crank sampling rate, but who knows.my opinion On the smoke is it could be anything from a map sensor issue to larger injector installed by previous owner, maybe a original mads catcher? Something eliminating torque management? . The best judge of smoke output and density would probably a roll on, I feel like the sun/shadow is making the smoke exaggerated but I may be wrong, I'm that way a lot
#4
only owned the truck for a month, MAP sensor sould throw a code and run rough, right?
the sun might have made it look slighty exaggerated but SLIGHTLY. Ill take another video if you want to see it from a roll or something. an original mads catcher? I take it thats a tuner like the smarty? i highly doubt its got a tune stored in it, the trucks pretty *****-less. Something elimintating torque? such as...?
Sorry for the stupid questions
the sun might have made it look slighty exaggerated but SLIGHTLY. Ill take another video if you want to see it from a roll or something. an original mads catcher? I take it thats a tuner like the smarty? i highly doubt its got a tune stored in it, the trucks pretty *****-less. Something elimintating torque? such as...?
Sorry for the stupid questions
#5
Is the RPM bounce you're talking about the slight shake in the needle when it's in park? Mine does that too, doesn't worry me much (or at all.) And these guys are right about the smoke, that's alot, I think you need to plug into a good scanner, sometimes the key trick doesn't give you everything
#6
#7
#8
#9
Have you tried adjusting the APPS at all since you've owned it? I agree that the high and low apps voltage codes at the same time is strange and maybe it could be a bad APPS?
---AutoMerged DoublePost---
and have you done anything to the truck like a fuel system or gauges? Before I knew a whole lot about these trucks and my stock fuel pump was going out, the rpms would jump around like your gauge does. My tach moves around a little bit but not like that
---AutoMerged DoublePost---
and have you done anything to the truck like a fuel system or gauges? Before I knew a whole lot about these trucks and my stock fuel pump was going out, the rpms would jump around like your gauge does. My tach moves around a little bit but not like that
Last edited by GuyWithA24Valve; 09-28-2011 at 03:25 PM. Reason: Automerged Doublepost