24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

No speedo, ABS light on, replaced vss

Thread Tools
 
Search this Thread
 
  #1  
Old 08-09-2011, 07:19 PM
brianell's Avatar
Diesel Fan
Thread Starter
Join Date: May 2008
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Default No speedo, ABS light on, replaced vss

Speedo was working over 25, then quit. Every once in a while, in the rain, I get the speedo back, but the brake and ABS lights stay on.

Just replaced the speed sensor in the rear end, no change. Its a 5speed , late 98, no sensor besides backup light switch in the trans/tcase.

Im thinking somewhere in the wiring is the issue, but Id love any ideas! Thanks!
 
  #2  
Old 08-09-2011, 10:20 PM
luke46's Avatar
Diesel Enthusiast
Join Date: Jul 2009
Location: NM
Posts: 379
Received 5 Likes on 5 Posts
Default

same prob with mine?
 
  #3  
Old 08-09-2011, 10:59 PM
H.R.D's Avatar
Super Moderator
iTrader: (3)
Join Date: Dec 2010
Location: Las Cruces, NM
Posts: 3,763
Received 1,052 Likes on 557 Posts
Default

Check the wiring on the driver side fender well. There is a plug that could have come undone take the liner out and it should be right there. Also check all fuses and relays.
 
  #4  
Old 08-10-2011, 11:49 AM
brianell's Avatar
Diesel Fan
Thread Starter
Join Date: May 2008
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by H.R.D
Check the wiring on the driver side fender well. There is a plug that could have come undone take the liner out and it should be right there. Also check all fuses and relays.
Checked fuses, and relays, nothing there so far.
2 plugs on the drivers side under the liner, right at the firewall body mount. Figured those would be it. Tweaked the pins a little to tighten them up, hosed with wd-40.

No change. Was throwing 0500 code, but after clearing that it has not come back. Still no speedo, and ABS and brake lights are on. Im getting pretty good at remembering speed based on gear and RPM, but this is annoying! Time to start chasing continuity with a tester is all I can figure. Going to be fun to figure out which wire out of 20 matches the speed sensor wire!
 
  #5  
Old 08-10-2011, 11:54 AM
H.R.D's Avatar
Super Moderator
iTrader: (3)
Join Date: Dec 2010
Location: Las Cruces, NM
Posts: 3,763
Received 1,052 Likes on 557 Posts
Default

It could be that the VSS is bad. Check into a new sensor maybe cheap enough to replace with out knowing for sure that is the problem.

http://www.obd-codes.com/p0501
 

Last edited by H.R.D; 08-10-2011 at 11:58 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Radioking1777
Chevy/GMC 6.2L and 6.5L
1
06-09-2015 04:13 AM
carid
Diesel Bombers Sponsors
1
04-15-2015 07:29 AM
Cutlass26
Chevy/GMC 6.2L and 6.5L
15
03-22-2015 05:46 PM
yams
Chevy/GMC 6.2L and 6.5L
1
12-07-2014 12:51 PM
ValleyF250
Ford Powerstroke 03-07 6.0L
0
11-01-2014 07:56 PM



Quick Reply: No speedo, ABS light on, replaced vss



All times are GMT -5. The time now is 02:02 AM.