Hi I need a GOOD trans shop in eastern Pa. to rebuild or replace my sliping 47re in my 99 ram 3500 daully I don't trust any trany shops ( I have 1 freind that is a manager of a Cottman and was there rebuilder and I saw the things that they do 1 master kit replace only 1st gear clutch and a paper kit , 1 master kit did 4 trans and he was told to do this at other non Cottman shops to ,I know people at AAMCO and they do it to) so I don't trust them AT ALL, THEY LIE FOR A LIVING so if any one knows a shop that will rebuild it rite let me know THANK YOU

Have ya checked in here yet. Diesel Bookmarks - Diesel Related Links Directory

Uncle Bubba's Sig:

99 Quad Cab, 4wd, Drag Comp W/Pump Wire & Boost Elbow installed, K&N Air Canon, MBRP exhaust, Belt Drive Lift Pump and bottom Bulkhead feed from the tank, Isspro EV Pyrometer, Boost Gauge, Fuel Pressure Gauge, DT Pro Fab Trac Bar, South Bend 13-1.25 Con O Clutch, Ranch Hand Bumper, Borgeson Steering Shaft, Black Silicone Boots, 2" Lift Soft Ride Front Coils, Solenoid High Idle Kit, Bilstein 5100 HD Shocks, Rickson 19.5 Wheels w/Hancoock Rubber, HD Maxx Link Sway Bar Links, Superlift dual front stabilizer, EGR Brakes Front and Back, RV275 Injector's, Blue Chip VP44, Prodigy brake controller, B&W Gooseneck hitch and more I can't remember right now. Not to mention more to come I'm sure.
374.2/846.7 at 30psi

Out in the Lebanon,PA area there is a gentleman who builds transmissions for diesels.

He at one time was part owner of East Coast Diesel and since the business split is out on his own.His name is Ladell Weaver and his performance transmissions are in alot of the local pullers rides.here is his contact number and you may need to leave a message for him to call you back......(717)-679-3611.

If you have been to any of the pulls in our area his truck is Green and is called "Wound Tight".......Andy

Hammer's Sig:

1998 Dodge Ram 2500 4x4 12v 5spd Quad Cab
Flame Red Sport
Mason-Dixon Turbo Diesel Club Event Co-Ordinator
MITCHELLized

lannings deisel........Hes on of Dave G installers

i don't know about weaver, it took him a while to get back to me about a clutch install, might have a fast pullin truck, but not much for customer service, i have a bunch of friends that used him. they were happy with the service on the truck, nice clean work, but didn't like the "personal" attention he lacked, AND they also paid an arm and a leg for it. i went to a guy in myerstown, right off of 422. minetree transmisions, his shop is new in town, BUT he has been in the game for a long time. he was the head tech at steve's trans in myerstown but wanted to start his own thing. he has one guy full time that works with him, might take a couple of days to get you in, but boy did he do a great job, and his price was right on, and fare.

cumminsdad08's Sig:

04.5 2500 quad cab Cummins Turbo Diesel HO 6spd-4in fabtec, 35-12.5x17 on american racing, cold air, high ram, edge juice with attitude, and a set of bass fish decals (they help with the HP)