I never even thought about this until Dave chimed in. While you have the cover off, make sure you tab the KDP....I know, I know...its not supposed to be an issue with a 24V but just do it. Also, i would use some loctite on all the other bolts under the timing cover.

 

Anyone use something else besides a gasket to prevent the front timing cover from leaking/seeping oil as they are known for?

 

You can use RTV (get the grey stuff from Dodge/Cummins) or you could also try "The Right Stuff" from Permatex.

 

I used both a cover gasket (12 valve) and a bit off RTV.

 

I just used a new gasket on my 12V.

 

I use RTV Ultra Black and never have a leak. Permatex makes some good stuff as well.

Dave

 

thanks guys,I'll pull the dang thing off.