Is it ok to have a little blow by
#1
Is it ok to have a little blow by
I have a 2000 dodge Cummins 2500 has 390.000 on it runs good I got the truck about a mouth ago my first Cummins love it I tryed to do the blow by test and noticed that there was a little light steam comes out of the engine cap hole but the cap does not move when I put it on the top am I ok I'm just nervous pleas let me know what you guys think
#2
#4
The Crankcase vent hose on the Cummins (on the front gear cover) is in my opinion in a bad spot. It will over time mist the chassis and front oil pan making a great place for dirt to stick. I relocated the outlet of the hose with some plastic pipe I imagine you could use a hose.
The main thing to worry about on diesels is white smoke and grey smoke out the exhaust.
Some blow by is normal it is a internal combustion engine.
I like driving down the interstate and looking at the oil spots after a bump in the road. It lets me know where the bumps are hahaha.
The main thing to worry about on diesels is white smoke and grey smoke out the exhaust.
Some blow by is normal it is a internal combustion engine.
I like driving down the interstate and looking at the oil spots after a bump in the road. It lets me know where the bumps are hahaha.
#6
The following users liked this post:
Jet A Fuel (07-11-2016)