24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

stock filter housing question

Thread Tools
 
Search this Thread
 
  #1  
Old 01-21-2013, 10:49 AM
grizzzly17's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2013
Location: mountain home, ID
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default stock filter housing question

i want to remove my stock filter housing and was wondering if the two plugs that connect to the filter, if i dissconnect them will it throw codes or screw with my ecm and all that? i think ones a heater and the other one is a pressure sensor?
 
  #2  
Old 01-22-2013, 08:32 AM
Ed ke6bnl's Avatar
Diesel Fan
Join Date: Apr 2008
Posts: 80
Received 3 Likes on 3 Posts
Default

I removed mine and no codes to put in an air dog. I also removed the pump and put in a aluminum plate so I could reuse the same bolts in the intake to take up the space of the pump mount.
 
  #3  
Old 01-22-2013, 09:00 AM
colinheitshusen's Avatar
Diesel Fan
Join Date: Aug 2011
Location: Ames iowa
Posts: 94
Likes: 0
Received 3 Likes on 2 Posts
Default

Youll want to keep your heater. anything below -10 and mine liked to freeze up without the heater. Just run your air dog Fuel line to the back of your filter houseing and than back out, than to the Pump.
 
  #4  
Old 01-22-2013, 05:41 PM
grizzzly17's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2013
Location: mountain home, ID
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

ok cool, ya i was wonderin about the heater cause its cold here, bout 0 or below in the mornins, but my airdog is hosed directly to the vp44 and skips the stock filter. does the heater work like the block heater that connects to a wall outlet? or like the glow plugs when the key is in the run position? thanks
 
  #5  
Old 01-22-2013, 06:17 PM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

The fuel heater uses 12 volt power form the truck. I believe the ECM measures fuel temperature to determine if the heater is energizer or not.
 
  #6  
Old 01-22-2013, 07:11 PM
grizzzly17's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2013
Location: mountain home, ID
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

ohh ok, does the heater make a big difference with starting in the cold? also would it be to much resistance on the air dog to have 3 filters inline? doubt it would be but just curious.
 
  #7  
Old 01-22-2013, 08:22 PM
MBFD 592's Avatar
Diesel Fan
Join Date: May 2012
Location: Mastic Beach N.Y.
Posts: 38
Received 2 Likes on 2 Posts
Default

when I installed my air dog I left the stock filter in place for the heater, and the water in fuel light. no problems so far.
 
  #8  
Old 01-22-2013, 08:32 PM
colinheitshusen's Avatar
Diesel Fan
Join Date: Aug 2011
Location: Ames iowa
Posts: 94
Likes: 0
Received 3 Likes on 2 Posts
Default

No the air dog wont have a problem pushing fuel past the original filter. you can leave it empty anyways. starting isnt the issue, its when its running is when you get problems cause its not running by a heat source at all. And like RAW said the fuel heater only works when needed
 
  #9  
Old 01-22-2013, 08:40 PM
North Maine's Avatar
Diesel Fan
Join Date: Oct 2012
Posts: 13
Received 3 Likes on 3 Posts
Default

Originally Posted by grizzzly17
ohh ok, does the heater make a big difference with starting in the cold? also would it be to much resistance on the air dog to have 3 filters inline? doubt it would be but just curious.
Not only starting, but to STAY running as well. My FASS is plumbed to feed the stock filter so fuel can continue to be heated when needed. Even with that, today at -10 I was freezing my FASS filters up and the truck was stalling out at anything over low-rpm idle. Once the truck had idled for 30-40 minutes (and a healthy dose of DIESEL 911) I was able to hit the road without bucking, smoking, and stalling.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeffersonl
General Diesel Related
1
11-15-2015 07:35 PM
wannadrag
Ford Powerstroke 03-07 6.0L
7
05-25-2015 03:07 PM
Bob V
Ford Powerstroke 03-07 6.0L
4
04-06-2015 11:02 PM
roanokerivermud
Ford 83-94 6.9 and 7.3L General
0
12-04-2014 10:52 AM
jeffersonl
Diesel In Distress - Support Ticket
0
10-25-2014 06:46 AM



Quick Reply: stock filter housing question



All times are GMT -5. The time now is 04:42 PM.