Bolt snapped in my crank...
#1
Bolt snapped in my crank...
So I noticed two bolts was out of my crankshaft dampneir and I went to pull the other two out and one broke off. So what are your suggestions?
---AutoMerged DoublePost---
Crankshaft dampner#
---AutoMerged DoublePost---
Crankshaft dampner#
Last edited by cummins270; 11-07-2012 at 10:58 PM. Reason: Automerged Doublepost
#2
#1, drill a hole through the center of the broken bolt. Never, ever heat a bolt before doing this. Drill the hole, try an easy out. If it doesn't work, heat the bolt red hot with a torch. Walk away for at least 20 minutes, and try an easy out again. I'll bet money it will come out. The Dampener may be toast at this point, but I'm betting it needs replacing anyway.
#4
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
ish1521
Ford Powerstroke 03-07 6.0L
1
08-26-2015 08:42 PM
NiNjAassasin545
12 Valve 2nd Gen Dodge Cummins 94-98
0
12-02-2014 11:40 PM