24v crack block?
#2
If it's a 53 block then yes pull the motor and send to me. Lol search 53 block then you shall see.
These blocks were cast poorly and can , will crack. In stock to moderate -500hp It would be fine. Much more then it could go. I have worked on 2 cummins trucks a 99 and a 01 and neither had the 53 so not sure the the 00 did but could be wrong as I am a ford guy 2.
These blocks were cast poorly and can , will crack. In stock to moderate -500hp It would be fine. Much more then it could go. I have worked on 2 cummins trucks a 99 and a 01 and neither had the 53 so not sure the the 00 did but could be wrong as I am a ford guy 2.
#4
Ive got a 53 bolck
Ive got a 53 block and mines fine but im around the 500hp level still,,ive got buddys that work for a cummins shop and they say its hit and miss,,read up on it and its up to you but im going for more hp with mine ill see when and if it'll let go...want to get a new motor anyway...
#5
#6
think i found the number today but it just says 5. im pulling the hose off tomorrow to look behind it but it would be a big space netween the 5 and the 3 if its a 53. hope its not ihave 600 hp plans for this thing.
oh and dont know why i put the cry smiley thing on there it was supposed to be a pondering look or some thin
---AutoMerged DoublePost---
i found a 5 small on the driver side forward of where the 53 should be and an A on on the passenger side forward of where the 53 should be ? what does this mean ? and the truck was built in mexico does that mean its a mexico block ?
oh and dont know why i put the cry smiley thing on there it was supposed to be a pondering look or some thin
---AutoMerged DoublePost---
i found a 5 small on the driver side forward of where the 53 should be and an A on on the passenger side forward of where the 53 should be ? what does this mean ? and the truck was built in mexico does that mean its a mexico block ?
Last edited by blowin-smoke; 09-22-2012 at 12:38 AM. Reason: Automerged Doublepost
#7
#9
#10