smoke screw - Diesel Bombers
Diesel Bombers
Go Back   Diesel Bombers > Dodge Cummins > 1st Generation Dodge Cummins 89-93
Search


1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

is the starwheel screw and the smoke screw to different screws I tightened the screw on the top of the pump and I didn't notice it smoking anymore then normal the spring is out of the afc housing. with that spring out will the smoke ... JOIN NOW TO REMOVE TRACER

smoke screw

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
  #1  
Old 03-29-2011, 07:45 PM
staylorw250's Avatar
Diesel Enthusiast
if you want to pull put your ponies in a row

   

Default smoke screw

is the starwheel screw and the smoke screw to different screws I tightened the screw on the top of the pump and I didn't notice it smoking anymore then normal the spring is out of the afc housing. with that spring out will the smoke screw not effect anything with the spring out. I am just looking for a little smoke to have fun with at school not to **** anyone off. right now it just puffs a lil bit I don't want to mess with the full fuel screw untill i have gauges
Reply With Quote
  #2  
Old 03-29-2011, 07:53 PM
jdbigblue12v's Avatar
Diesel Wrench
getting ready for paint

james depiazzy
   
View Member's FaceBook Profile

Default

what year is your truck? i know that after they came intercooled in 1991.5 the injectors became smaller, which will cause it not to smoke as much as the older ones. i have a 1993 and i am able to get smoke from turning the fuel screw 2 turns in and starwheel 1/2 of a turn.

jdbigblue12v's Sig:1993 ram w250 ext cab long bed 4x4 208,000mi 4'' straight piped to 6 inch tip behind tire, pump tweaked,homebrew fuel pin and intake, fresh .20" marine HG, new head bolts, timing advanced, hx35w, 33x13.50 on 18 inch billet wheels. soon to come low pressure lift pump, maybe compound with an hx55 and 5x.012 sticks by summer.
Reply With Quote
  #3  
Old 03-30-2011, 12:29 PM
staylorw250's Avatar
Diesel Enthusiast
if you want to pull put your ponies in a row

   

Default smoke screw

mine is a 89 non-intercooled the screw i turned was on the top of the afc housing t-25 screw and a 13mm lock nut i turned it all the way in and i never got anymore smoke.
Reply With Quote
  #4  
Old 03-30-2011, 01:48 PM
1989w250's Avatar
Diesel Enthusiast
Oops... I can fix that!

Elliot Robles Dirtydodge91
   
View Member's Youtube Account

Default

This will give you a good bit of smoke. At the end of the vid he explains how to get SMOKE
Reply With Quote
 
 
 
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search


 
All times are GMT -5. The time now is 05:52 AM.

Copyright And Legal Notice Links Of Interest

Diesel Bombers ® - All Content Protected Under Intellectual Property Rights Law of Registered Trademarks
Reg. No. 3,494,401 Cls. 100, 101 & 104 Under Int. Cl. 38
USE AT YOUR OWN RISK WE HOLD NO LIABILITY FOR ANY CONTENT RIGHT, WRONG OR INDIFFERENT

Protected by Copyscape Duplicate Content Check


Diesel Bombers Dodge Cummins Forum Section Diesel Bombers Ford Powerstroke Forum Section Diesel Bombers Chevy GMC Duramax Forum Section