hey guys if your tranny pops out of 5th under cost and it dont feel like its going into gear fully is that a shim thing/preload? i just had it done by a shop they wont warranty it after 5 miles ya 5 miles so i am gonna do it myself and iam gonna get my 300 bucks back too i got it all held up in the Bureau Automotive Repair and Better Business Bureau there a bunch of over at that shopfags

---AutoMerged DoublePost---

come on someone has to know -

big bad diesel 416's Sig:

1990 Cummins,D250, non I/C, 5 speed well i got it done and now it sounds like iam running a Jake break and its on.......what did i miss

dude i wish you luck, but i don't have a clue as to why a "redone" trans would pop out of gear. if i can catch my tranny guy at his shop some time this week i'll ask for you -

seandonato73's Sig:

1990 Dodge W250, custom intercooler, 4" turbo back exhaust,DDRP fass pump, 3200rpm gov spring, injection pump maxed out, 80hp DDP injectors, upgraded intake housing and compressor wheel,auto meter pyro,boost, fuel pres,and oilpres guages
comming soon: m&h fuel pin set(m2-m5) ,Air dog II fuel pump

1993 F150 264,000 miles on the 302, 6" lift 35x14.50 thornbirds,and still pullen jeeps out of the mud!!
1987 f250 6.9 IDI c6 auto, 2wd beater
1973 F250 hi boy 4x4, 360FE 37" TSL's no lift

well thanks anyway i fiugured it out the duchebag at the shop didnt put any shims in = no preload = pops out of gear i have 1/4-1/2 inch of movement in the shaft this guy was a hack i have found loose bolts no shims f-ed up seals the works -

doesn't that just piss u off when people don't care or take their time like that. -

DieselPerformanceGuy's Sig:

1992 dodge CTD,auto,RCLB, w250, 170,500 on the odometer,5x.014's , 366 spring, pump maxed, 1/2 turn from runaway, bully dog fuel pin, bully dog 4 inch exhaust, asa modifieds intake, auto meter boost and pyro gauges, isspro 4k tach, and a new 62/65/12 s300 turbo, soon to have an AirDog fuel pump.

thats bull $&it you better get your money back for that i'd be raising all heck -

well as a good businessman you want to treat your customers as good or better than you would expect to be treated by someone else

EX.

he messed up i told him nicely you messed up please fix it i will pull it out and pay for parts you do the labor for free..... not so bad i would have taken this option

he says ok bring the truck up here and let me drive it so i had it trailered up there and we dropped it off for a few hours i come back and say well he tells me i didn't even drive it be case unless you want to pay me another 150 up front i dont want anything to do with it it aint my fault....... big mistake

what he didn't know that i know all about the BAR the BBB and have been mechinicin on big-rigs and heavy equipment for the last 7 years and iam laid off so i have alot of free time to pursue this matter........

now i offer him one more time to fix it (as first stated) or refund my money $150 all this is through writing with the BBB and the BAR

he still says no

now due to me getting BAR involved they snooped around and found that he did not use proper paperwork with me guess what $1000 fine for that

i open my trany up and find all this Bull shit and damages that were caused by his lack of care during assembly and it cost me as of today 297.65 in screwed up parts........if he would of taking the first option he could have avoided 1000.00 from BAR 150.00 in refund and i would have forked out the 297.65 for the parts not knowing what the reasing was but no

so as of now he owes me 447.65 and BAR 1000.00

he refuses to pay me the 447.65

well guess what BAR sided with me and is providing me with solid evidence that he was at fault and a lawyer to take this fucker to court

so they advised me to sue for a realistic repair meaning if i were someone that didn't know anything and i took the whole truck to another shop to have ALL the work done local high was

Remove and install transmission 655.00
rebuild 1220.00
parts 585.94
me being troubled and without my only vehicle 200.00

so just for being a douchebag and not fixing your fuckup its gonna cost you $3108.59 to me and another $1000.00 to bar totaling $4108.59 oh and a bad rap by the word of mouth

let this be a lesson to anyone who think of screwing the most normal playing innocent guy that walks in to your shop! he just might be like me .....your worst nightmare

and guys dont get me wrong iam not like all the other sue happy americans that when you tell there kid to shutup the next thing you know they own your house -

-

captain_stabbin's Sig:

94cummins, 4"turbo back exhaust, fuel plate,

-

1.) This is why I do all my own work

2.) This is why I will help out friends but not take on paying side work.

go get em! -

Budgreen's Sig:

1993 W350 club cab 4x4 5spd dually.
Homemade custom fuel pin, star wheel and smoke screw cranked. 366 spring, HX35 in a few weeks possibly