Injectors current set up?? To hot?
#1
Injectors current set up?? To hot?
Yes another injector post
Im looking to pick up a new set of dfi injectors and a air dog in the next week or two I'm planing on doing my p7100 swap by summer then twins a ways down the road currently I drive the truck daily and pull on weekends I was thinking of going with 5x0.014 sac's for my later set up i dont wana buy injectors twice just want some more now my question is do you think I'm going to be driving by pyro all the time??? I havnt broke 1100 pre turbo with my trailer yet unless im climbing with my current mods also getting m&h m4 pin and timing advance when they get more done
Planing on eventually being around 600
Im looking to pick up a new set of dfi injectors and a air dog in the next week or two I'm planing on doing my p7100 swap by summer then twins a ways down the road currently I drive the truck daily and pull on weekends I was thinking of going with 5x0.014 sac's for my later set up i dont wana buy injectors twice just want some more now my question is do you think I'm going to be driving by pyro all the time??? I havnt broke 1100 pre turbo with my trailer yet unless im climbing with my current mods also getting m&h m4 pin and timing advance when they get more done
Planing on eventually being around 600
#3
#4
#5
Ya figured the hx would get to hot I'm hitting 35lbs with it already any mores pushing it's limits.
Any recommendations on the next
---AutoMerged DoublePost---
Turbo sorry
I'm going with a airdog when I order my injectors so supply's covered there
Any recommendations on the next
---AutoMerged DoublePost---
Turbo sorry
I'm going with a airdog when I order my injectors so supply's covered there
Last edited by Willey878; 01-26-2014 at 08:20 PM. Reason: Automerged Doublepost
#6
#7
Iv heard about about running the 14mm head did some searching couldnt find to much on the swap but heard alota guys saying its to much heat for the ve what's your thoughts on this I was thinking p-pump just for reliability but Iv also had alot luck with my so far beside the odd leek I do wana build a twin set eventually borgwarner box turbos most likely be it ved or ppump if hit hi 400hp I'll be more then happy any more then that's just for fun just want keep the egts don't for pulling in the hills my 7.3 intercooler and 3inch piping droped egts tons at wot iv 950 probe pre turbo pulling onto the highway
Thread
Thread Starter
Forum
Replies
Last Post
klein444
Chevy/GMC 6.2L and 6.5L
6
03-08-2015 11:42 AM