Lower idle further?
#1
Lower idle further?
Hey there, I have my fuel screw in about 2 1/2 turns. Idle was about 850 with the idle screw backed all the way out and the throttle plate riding on the ear where the idle screw is. I bumped the timing last night, and now it idles around 1000. This is WAY too high for my liking. Any suggestions besides re-clocking the throttle shaft/plate? I would prefer not to modify the plate, but am willing to as a last resort.
#2
Re-clocking is the easiest method in my opinion. You'll get more throttle travel out of it as well. You can also grind the lever that goes against the idle adjust screw.
Here is the sticky for that:
https://www.dieselbombers.com/89-93-...r-ve-pump.html
Here is the sticky for that:
https://www.dieselbombers.com/89-93-...r-ve-pump.html
Thread
Thread Starter
Forum
Replies
Last Post
hunt4beer
5.9 Liter CR Dodge Cummins 03-07
5
11-15-2014 09:06 AM