sloppy steering
#1
sloppy steering
ok guys, i know the stock steering on a dodge sucks. and i already know about the hydro assist for 800$ i could get, but with money being an issue i didnt know if there was any tips.
my steering box has so much slop in it, like over 90* of slop in the wheel, it is all tight to the steering gear, so thats my culprit. i have a new pitman arm and tie rod ends. steering gears the problem. is there anything that can be done to tighten it up? im good friends with a guy that owns a junkyard. i was just going to go out there and turn the wheels on some wrecked trucks out there and find the best one and hopefully get it for cheaap. i think anythings about better than what i have now so its worth a shot. does anyone know if they ram the same gears in 1/2 tons? if they did there would pry be in better condition than a heavy 3/4 ton, especially with the cummins, any helps appreciated
my steering box has so much slop in it, like over 90* of slop in the wheel, it is all tight to the steering gear, so thats my culprit. i have a new pitman arm and tie rod ends. steering gears the problem. is there anything that can be done to tighten it up? im good friends with a guy that owns a junkyard. i was just going to go out there and turn the wheels on some wrecked trucks out there and find the best one and hopefully get it for cheaap. i think anythings about better than what i have now so its worth a shot. does anyone know if they ram the same gears in 1/2 tons? if they did there would pry be in better condition than a heavy 3/4 ton, especially with the cummins, any helps appreciated
#4
#5
#8
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddiction
1st Generation Dodge Cummins 89-93
0
05-04-2015 06:28 AM